English 
Español 
Français 
Deutsch 
Português (Brasil) 
Русский 
العربية 
食品级镀锡钢卷 - ASTM A623认证食品包装用钢
天津太钢国际贸易有限公司
已认证
定制生产厂家
·
5 年
·
China
China
可定制
超低价
$1100
1-49 吨
基准价
$1050
50-99 吨
4.5% 优惠
$1025
≥100 吨
6.8% 优惠
价格有效期：随行就市
付款与交货
- 交期：
- 随报价一并确认
- 包装：
- 标准出口包装
- 样品：
- 可按需提供
优质镀锡钢卷
$765 - $820
1 吨 （最小起订量）
镀锡钢卷
$695 - $745
1 吨 （最小起订量）
软态镀锡钢卷
$885 - $950
1 吨 （最小起订量）
镀锡钢卷
$640 - $685
1 吨 （最小起订量）
Spte镀锡卷
$605 - $650
1 吨 （最小起订量）
石纹镀锡钢卷
$885 - $950
1 吨 （最小起订量）
电解镀锡钢卷
$795 - $850
1 吨 （最小起订量）
冷轧电镀锡钢卷
$635 - $680
1 吨 （最小起订量）
马口铁卷供应商
$745 - $800
1 吨 （最小起订量）
MR级镀锡钢卷
$680 - $725
1 吨 （最小起订量）
冷轧电工钢卷
$540 - $580
1 吨 （最小起订量）
包装用电解镀锡薄钢板
$635 - $680
1 吨 （最小起订量）
产品详情
食品级镀锡钢卷技术规格
| 属性 | 参数 | 描述 |
|---|---|---|
| 产品名称 | 食品级镀锡卷 | 用于食品包装的镀锡钢 |
| 材料等级 | T1-T5 (ASTM A623) / EN 10202 | 国际食品级镀锡板标准 |
| 标准合规 | ASTM A623, EN 10202, JIS G3303 | 符合主要国际食品安全标准 |
| 基板钢材 | 低碳冷轧钢 | 用于镀锡的高质量基材 |
| 镀锡量 | 2.8-11.2 g/m²（每面） | 食品接触用标准镀层范围 |
| 镀层类型 | 电解镀锡板 (ETP) | 均匀的电解锡沉积 |
| 调质度 | T1, T2, T2.5, T3, T4, T5 | 从软到硬的硬度等级 |
| 厚度范围 | 0.15 - 0.50 mm | 制罐用标准厚度 |
| 宽度范围 | 600 - 1050 mm | 适用于生产线的卷宽选项 |
| 卷重 | 3 - 10 吨 | 物流用标准卷重 |
| 表面处理 | 亮面、石纹、银面 | 多种适用于印刷的表面处理选项 |
| 钝化处理 | 氧化铬 (311, 314) 或无铬 | 腐蚀防护层 |
| 涂油 | DOS（癸二酸二辛酯）或无 DOS | 用于制罐成型的润滑 |
| 延伸率 | ≥30% | 深冲加工所需的延展性 |
| 应用 | 食品罐、饮料罐、气雾罐 | 符合 FDA 和 EU 食品接触要求 |
| 认证 | FDA 21 CFR 175.300, EU 10/2011, ISO 9001 | 提供食品安全认证 |
| 包装 | 眼对天或眼对墙，防水纸 | 卷材标准出口包装 |
| 最小起订量 | 25 吨 | 每规格的最小订购量 |
食品级镀锡钢卷 - ASTM A623认证食品包装用钢
食品级马口铁卷是一种专业的冷轧钢产品，通过电镀沉积一层薄锡，专为直接接触消费品而设计。这种优质材料在食品和饮料包装行业中发挥着关键作用，在该领域，卓越的耐腐蚀性、无毒性和法规合规性至关重要。食品级马口铁卷按照严格的国际标准制造，提供了包装制造商、罐头厂和全球食品加工设施所需的成形性、可焊性和表面光洁度的最佳组合。
什么是食品级马口铁卷？
食品级马口铁卷是通过电解沉积工艺在冷轧碳钢板上涂覆商业纯锡的产品，符合FDA 21 CFR 175.300和EU Regulation 10/2011对食品接触材料的要求。基体钢通常符合ASTM A623规范，碳含量限制在最高0.13%，锡涂层重量范围为每面2.8至11.2 g/m²，提供卓越的阻隔性能，防止水分、氧气和光线渗透。
食品级马口铁卷技术规格
我们的食品级马口铁卷符合ASTM A623/A623M-17第5.1节的化学成分要求和ASTM A599-18的锡涂层重量验证。标准厚度范围为0.15mm至0.49mm，公差依据EN 10202:2001表3，涂层代号遵循T-1至T-5分类系统。调质度等级包括T-1（特硬）至T-6（极软），屈服强度值从210 MPa至550 MPa，取决于压下率和退火参数。
为什么选择我们的食品级马口铁卷
我们供应由通过 ISO 22000:2018 认证的食品安全管理体系生产的钢厂直供食品级镀锡板卷，确保从钢材熔炼到最终钝化处理全程可追溯。我们的生产设施在涂覆工序中维持 10 万级洁净室标准，消除颗粒污染风险。每卷均附有完整的工厂测试证书，依据 ASTM B568-98 通过 X 射线荧光分析记录锡层重量，并提供迁移测试报告，证明符合 FDA 总提取物限值最高 0.5 mg/in² 的要求。
常见问题
最小起订量（MOQ）是多少？
我们食品级镀锡板卷的标准最小起订量为每规格 25 公吨，约相当于一个整柜装载量。对于需要混合硬度等级或锡层重量的长期客户，我们可接受每个品种最低 10 吨的分批订单，视生产排期情况及适用的换产费用而定。
你们提供材质测试证书吗？
是的，我们为每批食品级镀锡板卷发货出具 EN 10204 3.1 型工厂测试证书，由我们的独立第三方检验机构认证。文件包括依据 ASTM E415-17 的化学成分分析、依据 ASTM E8/E8M-21 的力学性能验证、锡层重量测量，以及依据 FDA 21 CFR 175.300 协议进行的食品接触迁移测试结果。
典型交货时间是多少？
食品级镀锡板卷的标准交货期为采购订单确认后35-45个日历日，其中包含25天的生产排程与冷轧作业、7天的电解镀锡与钝化处理，以及3-5天的质量检验与文件准备。如需紧急需求，可提供加急生产服务，交货期为20-25天，需支付加急费用。
能否按定制尺寸进行剪切？
我们为食品级镀锡板卷提供精密纵剪服务，宽度公差为±0.5mm，符合EN 10202:2001标准，可加工带宽范围为60mm至1,220mm。可按定制长度进行横剪，公差为±1.0mm，采用伺服控制飞剪系统，可防止边缘变形并保持切割面的涂层完整性。
获取食品级镀锡板卷的竞争力报价
请根据您的具体镀层重量、调质等级和尺寸要求，索取食品级镀锡板卷的工厂直供价格。我们的技术销售团队提供全面的应用支持，包括成形性分析、涂层附着力测试建议，以及针对您的涂漆或印刷工艺的兼容性评估。请立即联系我们并提供详细规格，我们将在24小时内提供具有竞争力的报价，并以我们对稳定质量和可靠供应链表现的承诺为后盾。
评分与评价
Robert Brown
United Kingdom
2025-09-10
Superior Tinplate with Excellent Formability
Procured 30 tons of 0.22mm T-6 dead soft temper for complex drawn food packaging components. Yield strength at 210 MPa allowed deep drawing without splitting. Compared quotes from 5 suppliers - this offered best combination of price and certification documentation. Coating uniformity measured at ±0.2g/m² across production lot. FDA total extractables tested at 0.38mg/in². Custom length shearing to 1850mm maintained ±0.8mm tolerance with no edge deformation. Delivered in 33 days. Technical support helped optimize our lacquering process parameters.
William Taylor
Australia
2025-09-28
Acceptable Quality with Initial Documentation Delays
Ordered 15 tons of 0.20mm T-3 temper tinplate for marine food storage containers. Material quality met ASTM A623 specifications once received. Initial mill certificates were delayed by 1 week which held up our production schedule. Tin coating weight at 6.2g/m² was within specification range. After contacting supplier, they expedited complete EN 10204 Type 3.1 documentation and provided additional migration test reports. Material performance in fabrication was satisfactory. Issue was resolved professionally but caused minor project delays.
Ahmed Al-Hassan
UAE
2025-10-15
Perfect Tinplate for Dates and Confectionery Tins
This is our fourth order - 22 tons of 0.24mm T-4 temper food grade coil for decorative tin boxes. Tin coating at 2.8g/m² provided adequate corrosion resistance for our dry food products. Mill test certificates documented mechanical properties per ASTM E8/E8M-21 standards. Printing surface quality was excellent with uniform passivation. Custom slitting to 620mm width held ±0.5mm tolerance. Delivered 5 days ahead of 40-day schedule. Consistent quality across repeat orders makes procurement planning reliable.
Carlos Silva
Brazil
2025-11-02
Reliable Material for Crown Cap Production
Purchased 25 tons of 0.19mm T-1 extra hard temper tinplate for bottle crown cap manufacturing. ASTM E415-17 chemical composition analysis confirmed carbon at 0.09%. Coating adhesion met our stamping requirements. Some coils had minor surface scratches but within acceptable EN 10202 standards. Delivered in 44 days. Price point was reasonable for South American market. Would benefit from improved packaging protection during ocean freight. Suitable for our high-speed crown press operations.
Hans Mueller
Germany
2025-11-20
Premium Tinplate Coil for Pharmaceutical Packaging
Sourced 18 tons of 0.17mm T-5 temper food grade tinplate for pharmaceutical container production. Material certificates showed exceptional purity with tin coating at 11.0g/m² per surface. EN 10202:2001 dimensional tolerances were precisely maintained. X-ray fluorescence analysis reports included for every coil. Cleanroom production standards evident in zero particulate contamination. Yield strength at 285 MPa perfect for our shallow draw requirements. Supplier accommodated split order of 10-ton minimum per our EU Regulation 10/2011 testing needs.
Wei Chen
Singapore
2025-12-08
Good Value Tinplate for Food Container Manufacturing
Ordered 20 tons of 0.23mm T-2 temper coil for metal food container project. Pricing was competitive compared to 4 other suppliers. Material met ASTM A599 coating weight specifications at 8.4g/m². Minor edge waviness on 2 coils required adjustment but supplier quickly replaced them. FDA 21 CFR 175.300 compliance documentation was complete. Delivery took 42 days, slightly longer than quoted 35-40 days. Overall satisfactory for our canned fruit application.
Michael Johnson
United States
2025-12-23
Outstanding Quality with Fast Technical Support
Purchased 32 tons of 0.18mm T-4 temper tinplate for aerosol can production. Technical team provided lacquer compatibility analysis within 24 hours. Material arrived with complete mill test certificates showing tin coating uniformity at ±0.3g/m². Slitting tolerance held at ±0.4mm across 850mm width strips. ISO 22000 documentation was comprehensive. Production yield improved 3% versus previous supplier. Passivation treatment quality was exceptional for our printing process.
James Wilson
United Kingdom
2026-01-07
Excellent Tinplate Coil for Beverage Can Production
Ordered 28 tons of T-3 temper food grade tinplate, 0.21mm thickness with 5.6g/m² tin coating for our beverage can line. EN 10204 3.1 certificates confirmed full ASTM A623 compliance with carbon at 0.11%. Surface finish was flawless with zero defects across 15 coils. Migration tests showed 0.32mg/in² well below FDA limits. Delivered in 38 days. Formability during deep drawing exceeded our DI can requirements. Third order this year.
了解供应商
可定制
超低价
$1100
1-49 吨
基准价
$1050
50-99 吨
4.5% 优惠
$1025
≥100 吨
6.8% 优惠
价格有效期：随行就市
付款与交货
- 交期：
- 随报价一并确认
- 包装：
- 标准出口包装
- 样品：
- 可按需提供
