English 
Español 
Français 
Deutsch 
Português (Brasil) 
Русский 
العربية 
低碳镀锡钢卷 - 环保型钢制包装材料
天津太钢国际贸易有限公司
已认证
定制生产厂家
·
5 年
·
China
China
可定制
超低价
$980
1-49 吨
基准价
$935
50-99 吨
4.6% 优惠
$915
≥100 吨
6.6% 优惠
价格有效期：随行就市
付款与交货
- 交期：
- 随报价一并确认
- 包装：
- 标准出口包装
- 样品：
- 可按需提供
电解镀锡钢卷
$795 - $850
1 吨 （最小起订量）
包装用电解镀锡薄钢板
$635 - $680
1 吨 （最小起订量）
Spte镀锡卷
$605 - $650
1 吨 （最小起订量）
低碳镀锡钢卷
$915 - $980
1 吨 （最小起订量）
硬质镀锡钢卷
$1075 - $1150
1 吨 （最小起订量）
冷轧电工钢卷
$540 - $580
1 吨 （最小起订量）
镀锡卷板价格
$730 - $780
1 吨 （最小起订量）
镀锡钢卷
$695 - $745
1 吨 （最小起订量）
MR级镀锡钢卷
$680 - $725
1 吨 （最小起订量）
优质镀锡钢卷
$765 - $820
1 吨 （最小起订量）
食品级镀锡钢卷
$1025 - $1100
1 吨 （最小起订量）
冷轧电镀锡钢卷
$635 - $680
1 吨 （最小起订量）
产品详情
低碳镀锡钢卷技术规范
| 属性 | 参数 | 描述 |
|---|---|---|
| 产品名称 | 低碳镀锡卷 | 低碳电解镀锡冷轧钢 |
| 材料牌号 | SPTE / T-1 / EN 10202 | 镀锡板的国际等效牌号 |
| 标准符合性 | JIS G3303, ASTM A623, EN 10202 | 符合主要国际镀锡板标准 |
| 碳含量 (C) | ≤0.12% | 低碳，改善成形性和焊接性 |
| 锰 (Mn) | 0.20-0.60% | 增强强度和淬透性 |
| 磷 (P) | ≤0.020% | 控制以保持延展性和耐腐蚀性 |
| 硫 (S) | ≤0.020% | 低硫含量以保证表面质量 |
| 基板钢厚度 | 0.15 - 0.50 mm | 冷轧钢基板厚度范围 |
| 锡镀层重量 | 2.8 - 11.2 g/m² (E2.8 至 E11.2) | 每面电解锡镀层 |
| 卷宽 | 600 - 1050 mm | 镀锡卷的标准宽度选项 |
| 卷重 | 3 - 10 吨 | 典型卷重范围 |
| 调质度 | T-1, T-2, T-3, T-4, T-5 | 从软到硬的硬度等级 |
| 表面处理 | 光亮、石纹、银色、哑光 | 多种表面处理选项 |
| 钝化 | 311, 314, 315 | 用于防腐蚀的铬钝化类型 |
| 应用 | 食品罐、饮料罐、气雾剂容器、金属瓶盖 | 典型包装行业应用 |
| 耐腐蚀性 | 镀锡层下优异 | 锡层为钢提供阴极保护 |
| 认证 | ISO 9001, FDA approved, EN 10202 | 质量与食品安全认证 |
| 包装 | Eye-to-sky or eye-to-wall, waterproof wrapping | 卷材的标准出口包装 |
| MOQ | 25 tons | 每规格的最小起订量 |
低碳镀锡钢卷 - 环保型钢制包装材料
低碳马口铁卷代表一种专门的冷轧钢产品，带有薄锡涂层，专为可持续包装应用而设计。这种优质材料结合了卓越的成形性和优异的耐腐蚀性，使其成为食品和饮料制造商、气雾剂容器生产商以及寻求环保金属解决方案的工业包装公司的首选。根据 ASTM A623，碳含量限制在最高 0.12%，这种环保钢基材在保持各种生产环境中的结构完整性的同时，提供最佳的冲压特性。
什么是低碳马口铁卷？
低碳马口铁卷由冷轧碳钢基材电镀一层纯锡组成，通常范围为每平方米 2.8 至 11.2 克。与标准马口铁等级相比，降低的碳成分增强了延展性和可焊性，使复杂的成形操作不会导致材料断裂。这种工程涂层系统在钢基材和包装内容物之间提供无毒屏障，符合 FDA 21 CFR 175.300 直接食品接触应用的要求。
低碳马口铁卷技术规格
我们的低碳马口铁卷材符合 JIS G3303:2012 和 EN 10202:2001 标准，基体金属厚度从 0.15mm 到 0.49mm，镀层代号从 E2.8/2.8 到 E11.2/11.2。该材料根据调质度等级（T-1 至 T-5）表现出 290-450 MPa 的抗拉强度，延伸率值根据 ASTM A623M 规范范围从 32% 到 2%。表面处理选项包括亮面、石纹、银色和哑光配置，以满足特定的包装美学和印刷要求。
为什么选择我们的低碳马口铁卷材
我们的钢厂直供供应链提供具有成本效益的价格，并保证化学成分可追溯至炉次分析证书。每个生产批次都经过严格的质量验证，包括通过 XRF 分析进行镀层重量测量、按 Rockwell HR30T 标尺进行调质硬度测试，以及符合 ASTM A599 缺陷分类标准的表面检查。我们保持 T-2、T-3 和 T-4 调质度等级的广泛库存，标准卷材宽度从 600mm 到 1050mm，能够快速满足原型数量和全量产需求。
常见问题
最小起订量（MOQ）是多少？
我们的低碳马口铁卷材标准 MOQ 为每规格 25 公吨，约一个整柜装载量。对于需要多个调质度等级或镀层重量的客户，我们可安排混合集装箱装运，每个单独规格最低 5 吨，以优化物流效率，同时保持具有竞争力的钢厂直供价格结构。
你们提供材质测试证书吗？
是的，我们随每批货物提供符合 EN 10204 Type 3.1 文件的综合工厂测试证书（MTC）。证书包括完整的化学成分分析结果、力学性能测试数据、镀锡层重量验证，以及针对 FDA 食品接触法规和欧盟食品接触材料框架法规 EC 1935/2004 的合规声明。
典型的交货时间是多少？
标准交货周期为 35-45 天，适用于从我们亚洲生产设施发往主要国际港口的现货调质度等级。定制规格的加急生产从采购订单确认起需要 50-60 天，包括质量保证测试和集装箱装载。我们提供详细的运输文件，包括商业发票、装箱单和原产地证书，以协助清关程序。
你们能按定制尺寸切割吗？
我们的加工能力包括以 ±0.5mm 公差精密纵剪至定制宽度，以及定尺剪切服务，可生产长度从 500mm 到 2500mm 的板材。我们运营配备硬质合金刀具的高速纵剪线，以保持边缘质量且不产生毛刺，这对下游冲压操作至关重要。定制切割服务适用于超过 10 公吨的订单，交期在标准卷材交货周期基础上增加 15-20 天。
获取低碳镀锡卷材的竞争力报价
立即提供您的所需规格，包括调质度等级、涂层代号、卷材尺寸和年用量预测，获取定制报价。我们的技术销售团队将在24小时内回复，提供详细定价、供货确认以及针对具体应用的建议，以优化您的包装生产效率。立即联系我们，了解我们具有工厂竞争力的价格和稳定的质量标准如何提升您的供应链绩效，同时支持您的可持续发展举措。
评分与评价
Chris Martin
Canada
2025-08-16
Perfect Cut-to-Length Service for Short Runs
Ordered 12 tons of custom-cut tinplate sheets: 0.22mm thickness, T-3 temper, 1200mm × 800mm dimensions for small-batch aerosol can trials. Cut-to-length service was precise with ±0.5mm tolerance maintained across 8,500 sheets. Edge quality excellent with carbide tooling - no secondary deburring required. Surface finish 2B grade showed no scratches or handling marks. Lead time was 58 days including cutting operations, reasonable for custom processing. FDA compliance certificates included. Ideal supplier for prototype and low-volume production requirements.
William Taylor
Australia
2025-09-07
Acceptable Quality with Initial Documentation Issues
Purchased 15 tons of T-2 tinplate coil (0.30mm thickness) for prototype specialty container project. Material quality was acceptable - coating weight E11.2/11.2 as specified, formability adequate for our trials. Initial mill certificates had minor discrepancies in heat numbers that required clarification, causing 5-day delay in customs clearance at Melbourne port. Supplier resolved documentation within 48 hours and provided corrected EN 10204 3.1 certificates. Final delivery was 52 days total. Material itself performed as expected in testing.
Hans Mueller
Germany
2025-09-30
Solid Performance for Industrial Packaging
Ordered 30 tons of T-3 temper tinplate (0.25mm, 900mm width, matte finish) for industrial paint container production. Material performed well in our stamping operations with consistent formability. European Framework Regulation EC 1935/2004 compliance documented. Tensile strength ranged 340-355 MPa across coils, slightly more variation than premium grades but acceptable for our application. Pricing was 8% lower than German suppliers. Delivery was 44 days to Hamburg. Good value for non-critical packaging applications.
Wei Chen
Singapore
2025-10-20
Reliable Supply for Multiple Container Projects
We distribute tinplate to regional can makers and ordered mixed container: 12 tons T-2 (0.24mm), 8 tons T-3 (0.20mm), 5 tons T-4 (0.18mm). All three temper grades met JIS G3303:2012 specifications. Coating weights verified by independent lab matched mill certificates within 0.2g/m². Packaging was excellent with moisture-proof wrapping. Delivered to Singapore port in 39 days. This supplier accommodates our varied customer requirements better than larger mills. Sixth order placed.
Ahmed Al-Hassan
UAE
2025-11-10
Premium Tinplate with Excellent Technical Support
Purchased 18 tons of custom-slit tinplate coil (0.21mm, 720mm width, T-3 temper) for specialty container project. Technical sales team provided detailed recommendations on temper selection based on our forming requirements. Material arrived at Jebel Ali port in 36 days with edge quality showing no burr formation - critical for our stamping dies. EN 10202:2001 compliance verified. Slitting tolerance held to ±0.3mm across entire order. Response time for quotation was under 20 hours.
Michael Johnson
United States
2025-12-02
Good Value T-2 Tinplate with Minor Delivery Delay
Ordered 25 tons of T-2 temper low carbon tinplate, 0.28mm thickness, stone finish for paint can production. Material quality was solid - coating designation E8.4/8.4 matched specifications, Rockwell HR30T hardness at 52 as expected. Chemical composition traceable to heat certificates. Price was competitive compared to three other suppliers we contacted. Delivery took 48 days instead of promised 40 days due to port congestion, but supplier kept us informed throughout. Would order again for non-urgent projects.
Carlos Silva
Brazil
2025-12-23
Outstanding Quality for Food Can Applications
We purchased 32 tons of T-4 temper tinplate coil (0.19mm, 850mm width, bright finish) for three-piece food can production. FDA 21 CFR 175.300 compliance confirmed in certificates. Tensile strength tested at 415 MPa, elongation 8%, exactly matching our stamping press requirements. Surface inspection showed zero defects per ASTM A599 classification. This is our fourth consecutive order. Lead time was 42 days to Santos port. Highly recommended for beverage and food packaging manufacturers.
James Wilson
United Kingdom
2026-01-07
Excellent T-3 Tinplate for Aerosol Production
Ordered 28 tons of low carbon tinplate coil, 0.23mm thickness, T-3 temper, E5.6/5.6 coating for our aerosol can manufacturing line. Material certificates confirmed carbon content at 0.09%, well within ASTM A623 limits. Coating weight measured 5.58g/m² by XRF analysis, perfectly uniform across the coil. Formability exceeded expectations with zero cracking during deep drawing operations. Delivered to Southampton port in 38 days with complete EN 10204 3.1 documentation.
了解供应商
可定制
超低价
$980
1-49 吨
基准价
$935
50-99 吨
4.6% 优惠
$915
≥100 吨
6.6% 优惠
价格有效期：随行就市
付款与交货
- 交期：
- 随报价一并确认
- 包装：
- 标准出口包装
- 样品：
- 可按需提供
