English 
Español 
Français 
Deutsch 
Português (Brasil) 
Русский 
العربية 
耐磨钢板 - AR400 AR500 Hardox 500 耐磨
天津太钢国际贸易有限公司
已认证
定制生产厂家
·
5 年
·
China
China
可定制
超低价
$580
1-49 吨
基准价
$555
50-99 吨
4.3% 优惠
$540
≥100 吨
6.9% 优惠
价格有效期：随行就市
付款与交货
- 交期：
- 随报价一并确认
- 包装：
- 标准出口包装
- 样品：
- 可按需提供
AR450钢板
$635 - $680
1 吨 （最小起订量）
耐磨钢板
$595 - $640
1 吨 （最小起订量）
耐磨钢板
$570 - $610
1 吨 （最小起订量）
耐磨钢板
$680 - $730
1 吨 （最小起订量）
耐磨钢板批发
$555 - $595
1 吨 （最小起订量）
耐磨钢板
$540 - $580
1 吨 （最小起订量）
AR400钢板
$540 - $580
1 吨 （最小起订量）
耐磨钢板价格
$600 - $645
1 吨 （最小起订量）
NM400钢板
$750 - $805
1 吨 （最小起订量）
耐磨钢带
$760 - $815
1 吨 （最小起订量）
高品质耐磨钢板
$635 - $680
1 吨 （最小起订量）
NM500钢板
$1115 - $1195
1 吨 （最小起订量）
产品详情
耐磨钢板技术规范
| 属性 | 参数 | 描述 |
|---|---|---|
| 产品名称 | 耐磨钢板 | 专为磨蚀环境设计的高硬度钢板 |
| 材质等级 | AR400, AR450, AR500, NM400, NM500, Hardox 400/450/500 | 国际耐磨等级对应牌号 |
| 标准符合性 | ASTM A514, JIS G3128, EN 10025-6 | 符合主要国际耐磨标准 |
| 碳 (C) | ≤0.28% | 用于保证硬度和强度的碳含量 |
| 锰 (Mn) | 0.80-1.60% | 提高淬透性和韧性 |
| 铬 (Cr) | 0.50-1.50% | 增强耐磨性和硬度 |
| 钼 (Mo) | 0.15-0.60% | 提高强度和抗冲击性 |
| 布氏硬度 | 360-550 HBW | 用于耐磨的表面硬度（取决于等级） |
| 抗拉强度 | ≥1250 MPa | AR400/NM400 等级的最低抗拉强度 |
| 屈服强度 | ≥1000 MPa | 保证结构完整性的最低屈服强度 |
| 延伸率 | ≥10% | 50mm 标距内的延展性 |
| 冲击韧性 | ≥24J at -40°C | 适用于低温服役的夏比 V 型缺口冲击值 |
| 厚度范围 | 6mm - 80mm | 适用于各种应用的可用厚度选项 |
| 宽度范围 | 1500mm - 3000mm | 用于加工制造的标准宽度 |
| 长度 | 6000mm - 12000mm 或定制 | 标准和定制长度选项 |
| 表面处理 | 热轧、喷丸或涂漆 | 多种表面处理选项 |
| 应用 | 采矿、水泥、建筑、回收设备 | 高磨损工业环境 |
| 认证 | EN 10204 3.1、ISO 9001、工厂测试证书 | 质量认证与材料可追溯性 |
| 包装 | 钢带捆扎、防水罩、木托盘 | 标准出口包装以提供保护 |
| MOQ | 5 tons | 标准牌号的最小起订量 |
耐磨钢板 - AR400 AR500 Hardox 500 耐磨
耐磨钢板代表了一类专门设计的高碳合金钢，用于承受采矿、采石和物料搬运作业中的严重磨蚀条件。这些优质钢板在传统结构钢过早失效的应用中提供卓越的使用寿命，对凿削、冲击和表面磨损具有优异的抵抗能力。我们的耐磨钢按照严格的冶金标准制造，服务于要求最大化正常运行时间和降低维护成本的行业。
什么是耐磨钢板？
耐磨钢板是一种经过整体淬火的合金钢产品，专门配制了较高的碳含量（0.15-0.35%）以及包括铬、锰和硼在内的强化元素。该材料经过受控的淬火和回火处理，以达到360 HBW至600 HBW的表面硬度，同时保持足够的芯部韧性以抵抗冲击载荷条件下的裂纹扩展。
耐磨钢板技术规格
我们的耐磨钢板符合ASTM A514和EN 10149-2标准，提供AR400（360-440 HBW）、AR450（430-480 HBW）、AR500（475-540 HBW）和优质Hardox 500（475-530 HBW）硬度等级。标准厚度范围为6mm至100mm，附带钢厂认证的化学成分和力学性能文件。典型碳当量值保持在0.52%以下，以确保符合AWS D1.1结构焊接规范的 optimal 焊接特性。
高硬度耐磨钢板的主要优势
与低碳钢相比，全硬化耐磨板在高磨损环境中可将设备使用寿命延长300-500%。该材料卓越的表面硬度最大限度地减少了滑动磨损造成的材料损失，而受控的合金化学成分保持了足够的延展性，以吸收冲击能量而不会发生脆性断裂。成本效益源于减少停机时间、降低更换频率以及减少采矿输送机、破碎机部件和自卸卡车衬板方面的维护人工需求。
制造工艺与质量控制
生产从电弧炉熔炼开始，随后进行钢包精炼，以达到精确的化学成分公差。热轧在1050-1200°C的温度下进行，随后在聚合物或水基介质中淬火，以形成马氏体显微组织。在180-250°C下回火可消除残余应力，同时保持目标硬度值。每块钢板均按照ASTM A435进行超声波检测以验证内部健全性，并使用校准的布氏硬度测试设备在多个位置进行硬度验证。
常见问题解答
最小起订量（MOQ）是多少？
我们的标准起订量为每种规格5公吨，但对于Hardox 500等优质等级或特殊厚度要求，可接受更小的数量。混合等级订单可组合AR400、AR450和AR500钢板以达到5吨的起订量，并提供工厂测试证书，按照EN 10204 3.1标准实现完全可追溯性。
你们提供材质测试证书吗？
是的，每批货物都包含全面的工厂测试报告，记录通过光电发射光谱法进行的化学分析、按 ASTM A370 进行的拉伸测试结果、指定温度下的夏比 V 型缺口冲击值，以及钢板表面的硬度分布图。可根据要求提供 SGS、Bureau Veritas 或 TÜV 的第三方检验，证书符合关键应用的 EN 10204 3.2 要求。
典型的交货时间是多少？
AR400 和 AR500 级别的库存商品从我们的区域配送中心发货，交货时间为 5-7 个工作日。特殊尺寸或 Hardox 等效级别的钢厂直供订单需要 35-45 天的生产周期，包括质量验证测试和表面处理。紧急需求可提供加急处理，标准厚度范围在 10mm 至 40mm 之间的交货时间为 15-20 天。
你们能按定制尺寸切割吗？
我们的加工厂提供精密的等离子和激光切割服务，尺寸最大 3000mm 的公差为 ±2mm。我们提供 30° 至 45° 角度的焊接坡口制备、钻孔和锪孔，以及表面研磨以达到特定的粗糙度值。定制坯料从经过认证的母板上切割，通过我们的 ERP 系统保持完整的可追溯性，确保每件产品保留原始的工厂测试报告对应关系。
获取耐磨钢板的竞争性报价
请联系我们的技术销售团队，获取 AR400、AR500 和 Hardox 500 耐磨钢板的工厂直销价格。我们提供以价值为导向的解决方案，具备钢厂认证质量、定制切割服务以及可靠的交付计划，以支持您的采矿、骨料加工和重型设备制造需求。请索取根据您的应用参数量身定制的详细规格和基于数量的定价结构。
评分与评价
Robert Brown
United Kingdom
2025-09-16
Perfect Custom-Cut Hardox 500 for Loader Buckets
Purchased 10 tons of Hardox 500 grade plate with custom plasma cutting to complex bucket profiles. Dimensional accuracy was within ±2mm on all 47 pieces, exceptional for 3-meter length parts. Hardness verification at 503 HBW with excellent through-thickness uniformity. Beveling at 30 degrees was precise for robotic welding setup. Technical drawings were reviewed by their engineering team before cutting, catching one dimension error we made. Delivery in 17 days including fabrication time. This level of service justifies the premium pricing for earthmoving equipment manufacturing.
William Taylor
Australia
2025-10-07
Acceptable Quality with Delivery Delay Resolved
Ordered 5.2 tons of AR500 plate in 18mm thickness for dredge pump housing application. Initial delivery was delayed by 8 days due to logistics issue, but supplier proactively communicated and arranged expedited shipping at no extra cost. Hardness testing showed 488 HBW average, slightly below 500 grade typical range but still acceptable for our use. Mill test reports were complete with proper SGS verification. Supplier offered 5% discount on next order as goodwill gesture. Material quality itself is fine, just minor coordination issues that were professionally handled.
Carlos Silva
Brazil
2025-10-20
Solid AR400 Performance for Screen Decks
Bought 7 tons of AR400 plate in 10mm thickness for vibrating screen deck replacement at our gold processing facility. Material certificates showed 0.22% carbon with proper chromium and manganese levels. Charpy impact values at -20°C were adequate at 27 Joules. Plates had some minor surface scratches from handling but nothing affecting performance. Price point was reasonable for South American delivery. Lead time was 42 days including ocean freight. Material is holding up well after 3 months of continuous operation with iron ore fines.
Wei Chen
Singapore
2025-11-03
Reliable AR500 Supplier for Repeat Orders
This is our fourth order for AR500 wear plate, total 11 tons in 30mm and 40mm thicknesses for recycling plant equipment. Consistent quality across all shipments with hardness between 495-525 HBW. EN 10149-2 compliance verified on every delivery. Laser cutting service provides precise hole patterns for bolt-on liner installation. Payment terms are flexible with 30-day credit after initial order. Technical support helped optimize plate layout to reduce material waste by 18%. Highly recommended for ongoing supply requirements.
Hans Mueller
Germany
2025-11-25
Premium AR450 with Fast Delivery
Procured 9 tons of AR450 abrasion resistant plate, 20mm thickness, 2000mm width for bucket elevator components. Ultrasonic testing per ASTM A435 confirmed zero internal defects. Brinell hardness mapping showed consistent 455 HBW across entire plate surface. Sales team responded within 4 hours with technical datasheet and pricing. Material shipped in 6 days from stock, critical for our production schedule. Surface grinding service achieved Ra 3.2 finish as requested for wear strip applications.
Ahmed Al-Hassan
UAE
2025-12-08
Good Value AR400 for Conveyor Chutes
Ordered 6.5 tons of AR400 plate in 15mm thickness for material handling chute fabrication. Hardness values ranged 385-425 HBW, within specification but toward lower end. EN 10204 3.1 certificates provided complete traceability. Pricing was competitive compared to three other suppliers we contacted. Delivery took 19 days, slightly longer than quoted 15 days. Overall good value for aggregate processing applications where extreme hardness is not critical.
Michael Johnson
United States
2025-12-23
Outstanding Hardox 500 Quality for Dump Truck Liners
Purchased 12 tons of Hardox 500 equivalent plate, thickness 12mm, for haul truck bed liners in our copper mining operation. Chemical analysis matched Hardox specifications exactly with 0.28% carbon content. Surface finish was clean with minimal mill scale. Technical team provided detailed welding procedures per AWS D1.1 code. Cut-to-size blanks had ±1.5mm tolerance, better than expected. Lead time was 38 days as promised. Material is performing exceptionally well under continuous iron ore loading cycles.
James Wilson
United Kingdom
2026-01-07
Excellent AR500 Plates for Crusher Liners
Ordered 8 tons of AR500 wear plate in 25mm thickness for our jaw crusher replacement project. Hardness testing confirmed 510 HBW average across all plates with full ASTM A514 compliance. Mill certificates showed carbon equivalent at 0.48%, perfect for our welding requirements. Plates arrived with plasma-cut bevels at 37.5 degrees as specified. Delivered in 11 days from order confirmation. Already seeing 400% longer service life compared to previous AR400 grade. This is our second purchase this year.
了解供应商
可定制
超低价
$580
1-49 吨
基准价
$555
50-99 吨
4.3% 优惠
$540
≥100 吨
6.9% 优惠
价格有效期：随行就市
付款与交货
- 交期：
- 随报价一并确认
- 包装：
- 标准出口包装
- 样品：
- 可按需提供
