English 
Español 
Français 
Deutsch 
Português (Brasil) 
Русский 
العربية 
耐磨钢带 - 高硬度耐磨合金钢带
天津太钢国际贸易有限公司
已认证
定制生产厂家
·
5 年
·
China
China
可定制
超低价
$815
1-49 吨
基准价
$780
50-99 吨
4.3% 优惠
$760
≥100 吨
6.7% 优惠
价格有效期：随行就市
付款与交货
- 交期：
- 随报价一并确认
- 包装：
- 标准出口包装
- 样品：
- 可按需提供
热轧耐磨钢板
$580 - $620
1 吨 （最小起订量）
耐磨钢板批发
$555 - $595
1 吨 （最小起订量）
耐磨钢板
$595 - $640
1 吨 （最小起订量）
AR400钢板
$540 - $580
1 吨 （最小起订量）
耐磨钢带
$760 - $815
1 吨 （最小起订量）
耐磨钢板
$570 - $610
1 吨 （最小起订量）
NM400钢板
$750 - $805
1 吨 （最小起订量）
NM500钢板
$1115 - $1195
1 吨 （最小起订量）
NM450钢板
$540 - $580
1 吨 （最小起订量）
耐磨钢板价格
$600 - $645
1 吨 （最小起订量）
耐磨钢板制造商
$580 - $620
1 吨 （最小起订量）
高品质耐磨钢板
$635 - $680
1 吨 （最小起订量）
产品详情
耐磨钢带技术规范
| 属性 | 参数 | 描述 |
|---|---|---|
| 产品名称 | 耐磨钢带 | 用于耐磨应用的高硬度钢带 |
| 材料牌号 | AR400 / AR450 / AR500 / NM400 / NM500 | 国际耐磨牌号对应等级 |
| 标准符合性 | ASTM A514, EN 10025-6, JIS G3128 | 符合耐磨钢的主要国际标准 |
| 碳 (C) | ≤0.30% | 控制碳含量以平衡硬度和焊接性 |
| 锰 (Mn) | 1.00-1.60% | 提高淬透性和耐磨性 |
| 铬 (Cr) | 0.50-1.50% | 提高硬度和耐腐蚀性 |
| 硅 (Si) | 0.20-0.80% | 脱氧剂和强化元素 |
| 表面硬度 | 360-540 HBW | 布氏硬度因牌号而异（AR400/NM400：360-440 HBW，AR500/NM500：470-540 HBW） |
| 抗拉强度 | ≥1200 MPa | AR400/NM400 牌号的最低抗拉强度 |
| 屈服强度 | ≥1000 MPa | 高磨损应用的最低屈服强度 |
| 延伸率 | ≥10% | 50mm 标距长度下的延展性 |
| 厚度范围 | 3mm - 50mm | 适用于各种应用的可用厚度选项 |
| 宽度范围 | 1000mm - 3000mm | 提供标准和定制宽度 |
| 表面处理 | 热轧、酸洗、涂油 | 多种表面处理选项 |
| 应用 | 采矿设备、工程机械、溜槽衬板、输送系统 | 典型的高磨损工业应用 |
| 冲击韧性 | ≥24J at -20°C | 适用于寒冷环境使用的夏比 V 型缺口冲击功 |
| 认证 | EN 10204 3.1, ISO 9001, CE | 随材料测试报告提供质量认证 |
| 包装 | 钢带捆扎、防水覆盖、木制垫板 | 适用于卷材或板材的标准出口包装 |
| 最小起订量 | 5 吨 | 标准牌号的最小起订量 |
耐磨钢带 - 高硬度耐磨合金钢带
耐磨钢带代表了一类专为承受工业环境中极端磨蚀条件而设计的高性能合金钢。这种优质材料广泛应用于采矿设备、物料输送系统、农业机械和建筑行业，这些领域的部件需要持续承受摩擦和冲击。通过受控的热处理工艺制造，这些钢带具有400至600 HBW的卓越表面硬度，同时保持足够的芯部韧性，使其成为寻求延长设备使用寿命和降低维护成本的制造商的首选。
什么是耐磨钢带？
耐磨钢带是一种扁平轧制的合金钢产品，专门设计用于抵抗由磨蚀、冲击和滑动摩擦引起的表面退化。通过精确合金化铬、锰和钼等元素，结合淬火和回火处理，这些钢带达到通常介于HB 400-600之间的优异硬度水平，同时保持足够的延展性以进行成型加工。该材料符合ASTM A514、EN 10025-6和JIS G3128等标准，确保各生产批次之间一致的机械性能。
耐磨钢带技术规格
标准牌号包括AR400、AR450、AR500和AR600，碳含量范围最高为0.15%至0.35%。根据牌号选择，抗拉强度达到1250-1850 MPa，而屈服强度通常超过1000 MPa，符合ASTM A514第7节。可用厚度范围为3.0mm至25.0mm，宽度选项最大可达2000mm，以卷材或定尺切割形式供应。表面处理选项包括轧制表面、喷丸处理或酸洗涂油状态。
为什么选择我们的耐磨钢带
我们的生产设施配备先进的 Steckel 轧机和连续退火线，确保厚度公差严格控制在 ±0.05mm，并具有优异的板形控制能力。每卷钢带均按照 ASTM A435 进行超声波检测以验证内部健全性，同时按照布氏硬度法 ASTM E10 在多个位置进行硬度测试。我们持有 ISO 9001:2015 和 IATF 16949 认证，为每个生产批次提供完整的材料可追溯性和质量证明书，记录化学成分、力学性能和热处理参数。
常见问题解答
最小起订量（MOQ）是多少？
我们的标准起订量为每种规格卷材 5 公吨，定尺剪切钢带为 2 公吨。对于试订单或原型开发，我们可接受 1 公吨的减量订单并收取相应附加费，使客户在全面量产承诺之前能够进行具有成本效益的材料评估。
你们提供材质证明书吗？
是的，我们随每批货物提供 EN 10204 Type 3.1 质量证明书，记录光谱仪检测的化学分析结果、按 ASTM A370 进行的拉伸试验数据、按规定间隔测量的硬度值，以及包括奥氏体化温度和淬火介质验证在内的热处理记录。
典型的交货时间是多久？
常用厚度的标准牌号现货产品在订单确认后 15-20 个工作日内发货。需要特殊轧制计划或热处理周期的定制规格通常需要 35-45 天，紧急需求可提供加急处理，视产能和附加费协议而定。
你们能按定制尺寸剪切吗？
我们的精密切割设备提供激光切割、等离子切割和水刀切割服务，线性尺寸公差能力可达 ±1.0mm。我们根据客户提供的 DXF 或 DWG 格式图纸加工复杂轮廓、螺栓孔图案和斜边，边缘质量符合 AWS D1.1 焊接准备标准，可直接用于焊接应用。
获取耐磨钢带的竞争力报价
立即联系我们的技术销售团队，讨论您的耐磨材料需求。我们提供工厂竞争力价格、全面的技术支持（包括材料选型指导），以及表面处理、定制包装和准时交货排程等增值服务。索取详细报价单，附完整规格表和应用工程支持，以优化您的部件性能和运营效率。
评分与评价
Ahmed Al-Hassan
United Arab Emirates
2025-09-10
Superior AR500 for Quarry Crusher Components
We ordered 15 tons of AR500 wear resistant steel strip, 10mm and 12mm thickness mix, 1200mm width for rock crusher impact plates and deflector shields in limestone quarry operation. Compared technical specifications from 5 suppliers - this material showed highest hardness consistency at 505-515 HBW range. Mill test certificates documented complete chemical composition including molybdenum at 0.32% for enhanced hardenability. Supplier provided application engineering support including wear pattern analysis recommendations. Custom cutting to 47 different part dimensions completed with ±0.9mm accuracy. Delivered in 19 days with proper export documentation for UAE customs. Material installed 6 weeks ago showing 50% less wear than previous standard grade. Excellent technical partnership for demanding mining applications.
Wei Chen
Singapore
2025-09-28
Acceptable Quality with Initial Documentation Delay
Ordered 4 tons AR400 strip, 6mm thickness for industrial shredder blade manufacturing. Material quality met ASTM A514 specifications with hardness at 410 HBW and proper mechanical properties. Initial shipment arrived without complete EN 10204 3.1 certificates - documentation was provided 5 days later after our request, causing minor project delay. Material itself performed well in forming and welding operations with no quality issues. Laser cutting service delivered parts within tolerance. Supplier resolved certificate issue professionally and offered 3% discount on next order as goodwill gesture. Once documentation matter was settled, overall experience became satisfactory. Material is performing adequately in our shredder application after 2 months service.
Chris Martin
Canada
2025-10-15
Solid AR450 Strip for Bulk Material Handling
Purchased 7 tons of AR450 grade, 8mm thickness, 1000mm width for hopper liner replacements in grain handling facility. Material hardness tested at 458 HBW, within specified range. Pricing was competitive at 8% below local distributor quotes for equivalent grade. Shot-blasted surface finish provided excellent coating adhesion for our corrosion protection system. Delivery required 25 days versus quoted 20 days due to production scheduling, but supplier communicated delay proactively. One coil had minor edge waviness affecting approximately 3 meters of material, which was acceptable for our application. Overall good value with reliable technical specifications. Would order again for non-critical timeline projects.
William Taylor
Australia
2025-11-02
Reliable AR500 for Dredging Equipment Wear Parts
Ordered 10 tons AR500 strip, 12mm thickness for dredge pump liner plates and discharge chute components. Supplier provided comprehensive technical data including impact toughness values (35J at -20°C) critical for our marine environment applications. Ultrasonic testing per ASTM A435 certificates confirmed zero internal defects. Thickness tolerance measured at ±0.04mm, better than standard ±0.05mm specification. Custom packaging in wooden crates with VCI protection arrived in perfect condition after 28-day sea freight. This is our third purchase for different dredging projects. Material performance in abrasive sand slurry service has been outstanding with minimal wear after 6 months operation.
Robert Brown
United Kingdom
2025-11-20
Premium AR400 Coils for Earthmoving Bucket Edges
Purchased 18 tons of AR400 wear resistant strip in coil form, 5mm thickness, 1500mm width for excavator bucket cutting edge production. Material demonstrated consistent hardness of 415-425 HBW across entire coil length per ASTM E10 testing protocol. Chemical analysis from mill certificates showed chromium at 0.85% and manganese at 1.45%, optimal for our welding procedures. Coil flatness was exceptional with less than 2mm deviation per meter, eliminating pre-flattening operations. Their technical support provided detailed forming guidelines including minimum bend radius calculations. Shipped within 14 days. We've processed 60% of material with zero rejection rate - exceptional quality control.
Hans Mueller
Germany
2025-12-08
Good Quality AR600 Strip with Competitive Pricing
Ordered 5 tons of AR600 grade, 10mm thickness for crusher liner plates in aggregate processing equipment. Material certificates showed hardness at 590 HBW and yield strength 1180 MPa, fully compliant with our specifications. Compared quotes from 4 European suppliers - this offer was 12% lower while maintaining ISO 9001 certification. Plasma cutting service provided acceptable edge quality though required minor grinding for some weld preparations. Delivery took 22 days, slightly longer than quoted 20 days but acceptable for our production schedule. Surface had minor mill scale in two areas but did not affect machining operations. Overall solid value for high-hardness applications.
James Wilson
United Kingdom
2025-12-23
Outstanding AR450 for Tillage Equipment Blades
We purchased 12 tons of AR450 grade strip in 8mm thickness, cut-to-length at 800mm x 150mm pieces for cultivator blade production. Technical sales team provided excellent material selection guidance comparing AR400 vs AR450 for soil abrasion resistance. Hardness measurements averaged 465 HBW across all pieces with ±8 HBW variation, demonstrating superior heat treatment control. Waterjet cutting service delivered parts within ±0.8mm tolerance, ready for direct welding per AWS D1.1 standards. Delivery completed in 16 days including custom cutting. This is our second order this season - material performance in field testing shows 35% longer service life than competitor products.
Michael Torres
United States
2026-01-07
Excellent AR500 Strip for Mining Conveyor Components
Ordered 8 tons of AR500 wear resistant steel strip, 6mm thickness, 1200mm width for our conveyor belt scraper replacements in coal mining operations. Material arrived with hardness testing at 512 HBW, exceeding our 500 HBW specification. EN 10204 Type 3.1 certificates confirmed carbon content at 0.28% and tensile strength at 1780 MPa. Mill finish surface quality was consistent across entire coil. Delivered in 18 days as promised. Our fabrication team reported excellent laser cutting performance with minimal edge hardening. This material has extended component life by 40% compared to previous AR400 grade.
了解供应商
可定制
超低价
$815
1-49 吨
基准价
$780
50-99 吨
4.3% 优惠
$760
≥100 吨
6.7% 优惠
价格有效期：随行就市
付款与交货
- 交期：
- 随报价一并确认
- 包装：
- 标准出口包装
- 样品：
- 可按需提供
