English 
Español 
Français 
Deutsch 
Português (Brasil) 
Русский 
العربية 
防弹钢板 - 用于军事与安保应用的防弹装甲板
天津太钢国际贸易有限公司
已认证
定制生产厂家
·
5 年
·
China
China
可定制
超低价
$580
1-49 吨
基准价
$555
50-99 吨
4.3% 优惠
$540
≥100 吨
6.9% 优惠
价格有效期：随行就市
付款与交货
- 交期：
- 随报价一并确认
- 包装：
- 标准出口包装
- 样品：
- 可按需提供
产品详情
防弹钢板技术规范
| 属性 | 参数 | 描述 |
|---|---|---|
| 产品名称 | Bulletproof Steel Plate | 用于弹道防护的高硬度装甲钢 |
| 材料牌号 | MIL-A-46100 / ASTM A514 / EN 10025-6 S690QL | 国际装甲钢牌号对应 |
| 标准符合性 | MIL-DTL-46100E, NIJ 0108.01, EN 1522/1523 | 符合军用和民用弹道标准 |
| 硬度 | 480-540 HBW（布氏） | 用于抗弹道的表面硬度 |
| 抗拉强度 | ≥1400 MPa | 符合 MIL-A-46100 的最低抗拉强度 |
| 屈服强度 | ≥1100 MPa | 用于结构完整性的最低屈服强度 |
| 伸长率 | ≥8% | 50mm 标距内的延展性 |
| 碳当量 (CEV) | ≤0.56% | 为可焊性而控制 |
| 厚度范围 | 4mm - 100mm | 可提供的装甲板厚度选项 |
| 宽度范围 | 1000mm - 3000mm | 标准和定制宽度 |
| 长度范围 | 2000mm - 12000mm | 标准和定制长度 |
| 弹道防护等级 | NIJ Level III / IV, FB4-FB7 (EN 1522) | 防御步枪弹和穿甲弹 |
| 表面处理 | 热轧、喷丸、涂装 | 多种表面处理选项 |
| 抗冲击性 | ≥27J at -40°C（夏比 V 型缺口） | 低温韧性 |
| 应用 | 军用车辆、装甲车、保险柜、掩体 | 国防和安全应用 |
| 认证 | MIL-STD, NIJ, EN 10204 3.1, ISO 9001 | 提供质量和弹道认证 |
| 包装 | 钢带捆扎、防水覆盖、木箱 | 出口标准防护包装 |
| MOQ | 5 tons | 最小起订量 |
防弹钢板 - 用于军事与安保应用的防弹装甲板
防弹钢板是一种关键防护材料，专为在国防、执法和安全基础设施应用中抵御高速弹丸冲击而设计。通过专业热处理和合金化工艺制造，这些防弹装甲板可提供500-600 HBW之间的卓越硬度等级，同时在极端威胁条件下保持结构完整性。我们的工厂直销防弹钢板解决方案服务于47个国家的军用车辆装甲、人员防护系统和关键基础设施防护需求，符合NIJ III级、IV级和STANAG 4569防弹标准。
什么是防弹钢板？
防弹钢板是一种高硬度装甲级钢合金，专门设计用于通过能量吸收和弹丸变形来抵御弹道威胁。该材料主要由碳钢组成，并添加锰、铬和钼，表面硬度可达500-600布氏硬度，同时保持韧性芯部结构，防止冲击时发生灾难性脆性断裂。
防弹钢板技术规格
我们的防弹装甲板符合MIL-DTL-46100E和STANAG 4569 2-4级要求。化学成分包括碳含量0.28-0.35%，锰1.0-1.6%，铬0.5-1.2%，抗拉强度最低超过1,250 MPa。可提供厚度范围为6mm至50mm，20°C时密度为7.85 g/cm³，按ASTM A829/A829M标准以平板形式供应，最大尺寸可达3,000mm x 12,000mm。
为什么选择我们的防弹钢板
我们运营三条专用装甲钢生产线，具备贯穿淬火能力，可在整个板材尺寸范围内实现一致的布氏硬度均匀性，偏差在 ±20 HBW 以内。我们的制造工厂持有 ISO 9001:2015 和 IATF 16949 认证，每批次均按照 MIL-STD-662F 协议进行 V50 弹道测试。钢厂直销定价消除了经销商加价，同时我们的技术支持团队为车辆集成项目提供装甲设计咨询和多发命中性能分析。
常见问题
最小起订量（MOQ）是多少？
我们的标准 MOQ 为每种规格 5 公吨，但对于需要在全面采购前进行材料验证测试的合格国防承包商和安全系统集成商，我们可以承接 1-2 吨的较小试订单。
你们提供材质证明书吗？
是的，每批货物均包含 EN 10204 Type 3.1 钢厂测试证书，记录按炉批号的化学成分、包括抗拉/屈服强度在内的力学性能、板材表面硬度分布图，以及按 ASTM A435 进行的超声波检测结果，确认弹道应用所需的内部健全性。
典型的交货时间是多少？
对于 8mm-25mm 的常备厚度范围，标准交货期为采购订单确认后 35-45 天。定制厚度要求或特殊热处理规格可能会将交货期延长至 50-60 天，具体取决于生产队列和所需的弹道测试验证安排。
你们可以按定制尺寸切割吗？
我们的工厂提供精密等离子和激光切割服务，可按客户指定尺寸加工，公差为±2mm，包括车辆车身面板和人员防护配置的复杂几何形状。我们还提供钻孔、锪孔和边缘倒角，以便于现场安装和焊接作业。
获取防弹钢板的有竞争力报价
立即联系我们的装甲钢专家，讨论您的弹道防护需求。我们提供技术数据表、V50测试报告以及针对军用车辆升级、安保岗亭建设和关键基础设施加固项目的经济高效解决方案。请提供详细规格，包括厚度、尺寸、数量和所需弹道威胁等级，以获取工厂直供报价和优化的装甲板推荐。
评分与评价
Chris Martin
Canada
2025-08-28
Acceptable Quality After Initial Surface Issue Resolved
Ordered 4 tons of 10mm bulletproof plate for security enclosure project. Initial shipment had surface scaling on approximately 15% of one plate. Supplier acknowledged issue immediately and provided replacement plate within 18 days at no charge. Replacement material was perfect with 515 HBW hardness and clean 2B-equivalent finish. Ballistic performance met NIJ Level III as specified. Appreciate the responsive customer service in resolving the problem. Final product quality was acceptable for our application requirements.
William Taylor
Australia
2025-09-20
Perfect Solution for Naval Vessel Armor Upgrade
Purchased 14 tons of 25mm armor plate for patrol boat bridge protection retrofit. Material certificates showed molybdenum at 0.28% and chromium at 0.95%, ideal for our welding procedures. Plates arrived with protective coating preventing corrosion during sea transport. Custom beveling on edges facilitated our shipyard installation. Delivered in 44 days from order confirmation. Technical team provided welding parameter recommendations that prevented heat-affected zone softening. Exceptional service for specialized maritime defense application.
Wei Chen
Singapore
2025-10-12
Solid Performance with Minor Documentation Delay
Ordered 5 tons of 12mm bulletproof plate for perimeter security barrier project. Material quality excellent with 535 HBW hardness and full STANAG 4569 Level 2 compliance. Ballistic testing results were comprehensive. Delivery was prompt at 39 days. Mill certificates arrived 3 days after shipment which caused minor customs clearance delay, but supplier expedited corrected documents immediately. Product itself met all specifications perfectly. Good value for Southeast Asian market.
Carlos Silva
Brazil
2025-11-03
Reliable Supplier for Repeat Armor Plate Orders
This is our fourth purchase totaling 32 tons over 14 months. Latest order of 9 tons (20mm thickness) for bank vault door project arrived in 41 days. Consistent quality with carbon content at 0.30-0.33% across all heat lots. Their laser cutting service for complex geometries with mounting holes saved us 8 days fabrication time. Pricing remains stable despite market fluctuations. Technical support responds within 24 hours with armor design consultation. Trusted partner for our security product line.
Hans Mueller
Germany
2025-11-25
Premium Hardness Consistency for Cash Transport Vehicles
Procured 10 tons of 8mm armor plate for armored van manufacturing. Hardness mapping results showed exceptional uniformity at 510-525 HBW across 2400mm x 6000mm plates. Ultrasonic inspection per ASTM A435 confirmed zero internal defects. Material performed perfectly in our ballistic testing against 7.62x51mm NATO rounds. Technical datasheet accuracy was 100%. Lead time of 36 days met our production schedule. This supplier understands European armor standards thoroughly.
Michael Johnson
United States
2025-12-08
Good Value Armor Steel for Vehicle Protection
Ordered 6 tons of 15mm bulletproof plate for MRAP door panel application. Material met MIL-DTL-46100E specifications with 545 HBW average hardness. Pricing was competitive compared to three other suppliers we evaluated. Delivery took 47 days, slightly longer than quoted 40-45 days. Minor edge roughness on two plates required additional grinding, but overall quality was solid for the price point. Would order again for non-critical timeline projects.
Ahmed Al-Hassan
UAE
2025-12-23
Outstanding Quality Armor Plate for Security Booth Construction
Purchased 12 tons of 10mm bulletproof steel plate (NIJ Level III rated) for critical infrastructure protection project in Abu Dhabi. EN 10204 Type 3.1 certificates documented carbon at 0.32% and tensile strength of 1,280 MPa. Surface finish was excellent with no grinding marks. Custom cutting service for 850mm x 1200mm panels saved significant fabrication time. Delivered 5 days ahead of the 42-day schedule. Highly professional communication throughout.
James Wilson
United Kingdom
2026-01-07
Excellent Ballistic Performance for Military Upgrade Project
Ordered 8 tons of 12mm bulletproof steel plate meeting STANAG 4569 Level 3 requirements for our APC retrofit program. Material certificates confirmed 520 HBW hardness uniformity within ±15 across all plates. V50 test reports exceeded specification at 780 m/s. Plasma cutting to our CAD drawings was precise within ±1.5mm tolerance. Delivery completed in 38 days. Technical support team provided valuable multi-hit spacing recommendations. This is our second order this year.
了解供应商
可定制
超低价
$580
1-49 吨
基准价
$555
50-99 吨
4.3% 优惠
$540
≥100 吨
6.9% 优惠
价格有效期：随行就市
付款与交货
- 交期：
- 随报价一并确认
- 包装：
- 标准出口包装
- 样品：
- 可按需提供
