English 
Español 
Français 
Deutsch 
Português (Brasil) 
Русский 
العربية 
DX52D电镀锌钢卷 - 用于汽车和家电制造的冷轧镀锌金属板
天津太钢国际贸易有限公司
已认证
定制生产厂家
·
5 年
·
China
China
可定制
超低价
$650
1-49 吨
基准价
$620
50-99 吨
4.6% 优惠
$605
≥100 吨
6.9% 优惠
价格有效期：随行就市
付款与交货
- 交期：
- 随报价一并确认
- 包装：
- 标准出口包装
- 样品：
- 可按需提供
电镀锌钢卷供应商
$605 - $650
1 吨 （最小起订量）
彩涂镀锌钢卷供应商
$600 - $645
1 吨 （最小起订量）
建筑用镀锌钢卷
$486 - $520
1 吨 （最小起订量）
小卷电镀锌钢
$580 - $620
1 吨 （最小起订量）
GL钢卷
$605 - $650
1 吨 （最小起订量）
镀锌钢带
$623 - $667
1 吨 （最小起订量）
建筑行业镀锌钢出口商
$579 - $620
1 吨 （最小起订量）
镀铝锌钢卷
$580 - $620
1 吨 （最小起订量）
ASTM a53镀锌钢管
$700 - $750
1 吨 （最小起订量）
镀锌钢卷价格
$580 - $620
1 吨 （最小起订量）
家电用镀锌钢
$563 - $604
1 吨 （最小起订量）
镀锌钢分销商
$671 - $718
1 吨 （最小起订量）
产品详情
DX52D电镀锌钢卷技术规格
| 属性 | 参数 | 描述 |
|---|---|---|
| 产品名称 | DX52D 电镀锌钢卷 | 带电解锌涂层的冷轧钢 |
| 材料牌号 | DX52D / EN 10142 / ASTM A653 CS Type B | 适用于深冲压的国际等效牌号 |
| 标准符合性 | EN 10142, EN 10346, ASTM A653 | 符合欧洲和美国标准 |
| 碳 (C) | ≤0.12% | 低碳，具有优异的成形性 |
| 锰 (Mn) | ≤0.60% | 提高强度和淬透性 |
| 磷 (P) | ≤0.10% | 控制含量以保证延展性 |
| 硫 (S) | ≤0.045% | 低硫，改善焊接性 |
| 屈服强度 | 140-300 MPa | 符合 EN 10142 的最小屈服强度 |
| 抗拉强度 | 270-500 MPa | DX52D 牌号的抗拉强度范围 |
| 延伸率 | ≥28% | 优异的延展性，适用于深冲压应用 |
| 锌层重量 | 40-120 g/m²（双面） | 电解锌涂层，用于防腐蚀保护 |
| 厚度范围 | 0.15-3.0 mm | 可选厚度 |
| 宽度范围 | 600-1500 mm | 标准及定制宽度 |
| 卷内径 | 508 mm / 610 mm | 标准内径选项 |
| 表面处理 | 电镀锌，平整 | 光滑表面，适用于涂装和涂层 |
| 应用 | 汽车零部件、家用电器、建筑 | 非常适合深冲压和成形应用 |
| 认证 | EN 10204 3.1, ISO 9001, SGS | 提供质量认证 |
| 包装 | 防水纸、钢带、木托盘 | 标准出口海运包装 |
| MOQ | 25 吨 | 每规格最小起订量 |
DX52D电镀锌钢卷 - 用于汽车和家电制造的冷轧镀锌金属板
DX52D 电镀锌钢卷代表了一种优质冷轧钢基材，采用电解方式施加锌层，专为要求严苛的汽车车身面板、家用电器外壳和精密金属成型应用而设计。这种欧洲标准材料将卓越的表面平滑度与优异的耐腐蚀保护相结合，为需要在大批量生产环境中保持稳定质量的制造商提供最佳的涂料附着性能和成型性。
什么是 DX52D 电镀锌钢卷？
DX52D 电镀锌钢卷是一种符合 EN 10346:2015 标准的低碳冷轧钢产品，具有通过电解镀锌工艺沉积的均匀锌层。牌号“DX52D”表示深冲质量，屈服强度为 140-300 MPa，而电镀锌工艺通过电化学沉积在每面施加 20-60 g/m² 的锌层，从而获得极其光滑的表面，非常适合直接涂装应用。
DX52D 电镀锌钢卷技术规格
根据 EN 10346 第 6.1 节，该材料表现出 270-410 MPa 的抗拉强度，纵向延伸率超过 34%。碳含量限制在最高 0.12%，确保通过电阻点焊和激光焊接技术具有优异的可焊性。可选厚度范围为 0.40mm 至 3.00mm，宽度选项在 600mm-1,500mm 之间，以最大 25 公吨的卷重供应，适用于连续加工生产线。
为什么选择我们的 DX52D 电镀锌钢卷？
我们的生产设施持有 ISO 9001:2015 和 IATF 16949:2016 认证，保证在整个钢卷长度上镀层重量分布一致，公差在 ±10% 以内。我们采用先进的拉伸矫直设备，根据 DIN EN 10131 实现低于 8 I-unit 的平直度值，同时我们的专有钝化处理根据 ASTM B117 将耐腐蚀性延长至中性盐雾测试 480 小时。钢厂直销定价消除了中间商加价，为汽车一级供应商和白色家电制造商提供具有成本效益的解决方案。
常见问题
最小起订量（MOQ）是多少？
我们的标准最小起订量为每规格 25 公吨，但对于具有既定生产计划的合格汽车和家电制造商，我们可以接受 10 吨的试订单。在 508mm 或 610mm 的单一钢卷内径规格内接受混合厚度订单，以优化物流效率。
你们提供材质证明书吗？
每批货物均包含 EN 10204 Type 3.1 钢厂测试证书，记录按炉次分析的化学成分、按 EN ISO 6892-1 拉伸测试的力学性能，以及通过三点 XRF 测量的镀层重量验证。可根据要求提供额外的按 EN ISO 1460 的镀层附着力报告和表面粗糙度数据。
典型的交货时间是多久？
对于 0.50mm-2.00mm 的库存厚度范围，标准交货时间从采购订单确认起为 25-30 个日历日。0.40mm-0.49mm 或 2.00mm 以上的定制厚度要求可能会根据生产计划将交货期延长至 35-40 天。对于 50 吨以下的数量，可提供 18 天的加急交货，需收取额外费用。
你们能切割成定制尺寸吗？
我们的精密纵剪线可满足宽度600mm-1,200mm范围内±0.5mm的宽度公差，通过硬质合金圆盘刀系统将边缘毛刺高度控制在0.02mm以下。落料服务提供最大尺寸达1,500mm × 6,000mm的定尺板材，每米垂直度偏差小于1.0mm，适用于无需二次边缘处理的直接冲压操作。
获取DX52D电镀锌钢卷的竞争力报价
请联系我们的技术销售团队，获取根据您特定厚度、宽度和镀层重量要求定制的DX52D电镀锌钢卷的钢厂直销价格。我们为汽车原型项目提供免费的成形性分析和模具兼容性评估，依托我们25年来为欧洲汽车OEM厂商以及北美和亚洲市场主要家电品牌供货的专业经验。
评分与评价
John Smith
United States
2025-09-10
Premium Quality for High-Volume Automotive Production
Ordered 25 tons of DX52D electro galvanized coil (0.68mm thickness, 1220mm width) for our automotive fender production line running at 450 parts per hour. IATF 16949 certification and PPAP documentation package met our tier-1 supplier requirements completely. Coating adhesion test results per ASTM D3359 showed 5B rating consistently. Formability in our complex draw dies exceeded expectations with Erichsen values averaging 11.2mm. Material traceability through heat number coding enables perfect lot tracking. This supplier now approved in our AVL for ongoing production orders.
Robert Brown
United Kingdom
2025-09-28
Acceptable Quality After Initial Width Issue Resolved
Purchased 14 tons of DX52D coil (0.65mm thickness, 1150mm width specification) for ventilation ductwork. First coil arrived at 1145mm width, outside our ±3mm tolerance. Supplier acknowledged the deviation immediately and provided replacement coil within 12 days at no additional cost. Subsequent material met all dimensional requirements. Mechanical properties tested satisfactory with yield strength 175 MPa. Zinc coating appearance uniform. Customer service handled the issue professionally. Would consider ordering again given their responsive problem resolution.
William Taylor
Australia
2025-10-14
Solid Performance for Non-Critical Marine Components
Ordered 10 tons of DX52D material (1.00mm thickness, 900mm width) for interior marine equipment brackets. Corrosion resistance in our accelerated salt spray chamber reached 465 hours, slightly below their stated 480 hours but sufficient for our indoor application. Surface finish quality was good with no visible pitting. Compared quotes from 4 Australian suppliers before selecting this option for 12% cost savings. Delivery was 34 days. Material performs well in our bending and punching operations with minimal springback.
Ahmed Al-Hassan
UAE
2025-11-02
Reliable Supply for Electrical Enclosure Production
Third consecutive order placed, 16 tons of DX52D coil (0.75mm gauge, 1300mm width) for our electrical cabinet manufacturing. Consistent mechanical properties batch-to-batch allow us to maintain stable production parameters. Tensile strength averaged 295 MPa across three coils tested. Edge quality from their slitting line is excellent with burr height under 0.015mm, no secondary deburring needed. Technical sales team responded within 4 hours to our coating weight inquiry. Logistics coordination was smooth with accurate shipping documentation.
Carlos Silva
Brazil
2025-11-20
Perfect Coating Uniformity for Refrigerator Doors
We sourced 20 tons of DX52D electro galvanized steel (0.50mm thickness, 1200mm width) for our refrigerator door panel line. XRF measurement data provided with shipment showed coating weight variation only ±6% across 47 test points, best consistency we've seen. Material certificates documented carbon content at 0.09%, ensuring excellent spot weldability. Our powder coating line reported superior paint adhesion compared to previous supplier. Flatness was I-unit 6, eliminating our leveling step. Delivered in 29 days to Santos port.
Hans Mueller
Germany
2025-12-08
Good Value Material with Acceptable Tolerances
Purchased 12 tons of DX52D coil (0.80mm thickness, 1000mm width) for HVAC cabinet production. Material quality meets EN 10346 specifications and coating weight averaged 42 g/m² per side as ordered. Thickness tolerance was within ±0.04mm, slightly wider than premium suppliers but acceptable for our application. Price point was 8% lower than German mills. Salt spray test results showed 510 hours protection. Delivery took 32 days, reasonable for import material. Would order again for cost-sensitive projects.
James Wilson
United Kingdom
2025-12-23
Outstanding Formability for Washing Machine Drums
This is our fourth order of DX52D material, 18 tons this time (0.60mm gauge, 1100mm width) for washing machine outer casings. The deep-drawing performance is consistently excellent with no cracking issues during our 180mm draw depth operations. Zinc coating adhesion passed our internal bend test requirements per ISO 1460. Lead time was 26 days including custom slitting to our exact width specification. Technical support team provided helpful forming parameter recommendations that reduced our scrap rate by 3%.
Michael Chen
Singapore
2026-01-07
Excellent Surface Quality DX52D for Automotive Panels
Ordered 22 tons of DX52D electro galvanized coil (0.70mm thickness, 1250mm width) for our door panel stamping line. EN 10204 3.1 certificates confirmed yield strength at 168 MPa and elongation 38%, exceeding our requirements. Surface roughness measured Ra 0.4μm, perfect for our direct painting process. Coating weight uniformity was impressive at ±7% across the entire coil. Delivered in 27 days as promised. Our quality team found zero surface defects after inspecting 15 random samples.
了解供应商
可定制
超低价
$650
1-49 吨
基准价
$620
50-99 吨
4.6% 优惠
$605
≥100 吨
6.9% 优惠
价格有效期：随行就市
付款与交货
- 交期：
- 随报价一并确认
- 包装：
- 标准出口包装
- 样品：
- 可按需提供
