English 
Español 
Français 
Deutsch 
Português (Brasil) 
Русский 
العربية 
碳钢花纹卷 - 高品质热轧地板板
百曲钢卷制造有限公司
已认证
定制生产厂家
·
4 年
·
China
China
可定制
超低价
$610
1-49 吨
基准价
$583
50-99 吨
4.4% 优惠
$570
≥100 吨
6.6% 优惠
价格有效期：随行就市
付款与交货
- 交期：
- 随报价一并确认
- 包装：
- 标准出口包装
- 样品：
- 可按需提供
产品详情
碳钢花纹卷技术规格
| 属性 | 参数 | 描述 |
|---|---|---|
| 产品名称 | Carbon Steel Checkered Coil | 带凸起菱形/泪滴形花纹的热轧碳钢卷 |
| 材料牌号 | SS400 / Q235B / A36 / S235JR | 常见国际牌号对应 |
| 标准符合 | ASTM A786, GB/T 3277, JIS G3131, EN 10025 | 符合主要国际标准 |
| 制造工艺 | 热轧 + 花纹压花 | 花纹在热轧过程中形成 |
| 碳 (C) | ≤0.20% | 碳含量兼顾成形性与强度 |
| 锰 (Mn) | ≤1.40% | 提高强度和淬透性 |
| 磷 (P) | ≤0.045% | 控制以保证延展性 |
| 硫 (S) | ≤0.045% | 低硫以改善焊接性 |
| 硅 (Si) | ≤0.35% | 脱氧剂和强化剂 |
| 抗拉强度 | 370 - 500 MPa | 按材料牌号的典型范围 |
| 屈服强度 | ≥235 MPa | 最小屈服强度（Q235B/S235JR） |
| 延伸率 | ≥26% | 50mm 标距下的延展性 |
| 基板厚度 | 1.5 - 8.0 mm | 不含花纹高度的基板厚度 |
| 花纹高度 | 0.5 - 1.5 mm | 基板表面以上的凸起花纹 |
| 卷宽 | 1000 - 2000 mm | 可提供标准及定制宽度 |
| 花纹类型 | 菱形、泪滴形、扁豆形、圆豆形 | 多种防滑花纹可选 |
| 应用 | 地板、楼梯、卡车车厢、平台、坡道 | 防滑工业及结构应用 |
| 认证 | EN 10204 3.1, ISO 9001, SGS | 提供质量认证 |
| 包装 | 天眼或墙眼，钢带捆扎 | 标准海运出口包装 |
| MOQ | 5 tons | 最小起订量 |
碳钢花纹卷 - 高品质热轧地板板
碳钢花纹卷是一种热轧钢材产品，其一面带有凸起的菱形或泪滴形花纹，专为在工业和商业地板应用中提供卓越的防滑性能而设计。这种多功能材料在结构平台、楼梯踏板、卡车车厢和走道建设中发挥着关键作用，为全球承包商、制造商和钢材经销商提供了机械强度、表面摩擦力和成本效益价格的最佳组合。
什么是碳钢花纹卷？
碳钢花纹卷——也称为碳钢花纹卷或菱形板卷——是一种连续轧制的扁平钢材产品，在热轧过程中将压花图案压入表面。该材料按照 GB/T 3277、JIS G3131 或 ASTM A786/A786M 标准制造，将低碳钢的结构完整性与纹理表面相结合，可在潮湿、油污或高流量环境中防止滑倒。
碳钢花纹卷技术规格
我们的花纹钢卷由 Q235B、SS400 或 ASTM A36 等效基材生产，确保下游加工具有可靠的焊接性和成型性。
| 参数 | 规格范围 |
|---|---|
| 基板厚度 | 1.8 mm – 8.0 mm |
| 卷宽 | 1000 mm – 1500 mm（1219 mm / 1250 mm 为标准） |
| 花纹高度 | 高出基板表面 0.5 mm – 2.0 mm |
| 花纹类型 | 菱形（5条筋）、泪滴形、扁豆形 |
| 屈服强度 | ≥235 MPa（Q235B，依据 GB/T 700-2006） |
| 抗拉强度 | 370–500 MPa |
| 卷重 | 每卷 3–15 公吨 |
| 表面处理 | 涂油 / 酸洗并涂油 / 干燥 |
| 适用标准 | GB/T 3277-2009、JIS G3131、ASTM A786/A786M |
花纹钢卷的主要应用
- 工业地板与平台：夹层铺板、工厂走道和装卸货台面，防滑牵引力至关重要
- 运输设备：卡车车厢底板、拖车地板和船舶甲板铺板，要求具备强大的耐磨性
- 建筑与装饰：楼梯踏步、排水盖板和装饰性墙面覆层
- 农业与采矿：设备坡道、粮仓地板和暴露于恶劣作业条件下的重型通道平台
为什么选择我们的碳钢花纹钢卷
凭借超过 15 年的出口经验，我们供应钢厂直供的花纹钢卷，具备全程可追溯性。每卷均随附符合 EN 10204 Type 3.1 的钢厂测试证书（MTC），记录化学成分、力学性能和尺寸公差。我们的自有纵剪和定尺剪切生产线可快速加工至您项目的精确尺寸，减少现场浪费和人工成本。
常见问题
最小起订量（MOQ）是多少？
我们碳钢花纹卷的标准起订量为每个厚度和宽度组合 5 公吨。可根据要求提供包含多种尺寸的拼柜订单。
你们提供材质证明书吗？
是的。每批货物均随附按 EN 10204 Type 3.1 签发的原始 MTC，依据适用标准验证化学成分、拉伸性能和花纹尺寸。
典型的交货时间是多久？
现货尺寸在 7–10 个工作日内发货。具有特定厚度、宽度或花纹要求的定制轧制花纹卷通常需要自订单确认起 20–30 天。
你们可以按定制尺寸切割吗？
当然可以。我们提供分条至更窄带材宽度以及定尺开平加工，交付可直接用于加工或安装的成品花纹板。
获取碳钢花纹卷的竞争力报价
准备以工厂竞争力价格采购优质花纹卷了吗？立即联系我们的销售团队，告知您所需的厚度、宽度、花纹类型和数量。我们将在 24 小时内回复所有询价，并提供详细报价，包括发往您目的港的 FOB、CFR 或 CIF 条款。
评分与评价
Chris Martin
Canada
2025-02-17
Acceptable Checkered Coil Quality with Delivery Delay Resolved
Ordered 6 tons of checkered coil in 4.0mm thickness, 1219mm width for factory walkway panels in Ontario. Material quality itself was fine — tensile properties on the MTC were within spec and the anti-slip pattern was consistent. However, delivery ran 5 days longer than the quoted 7–10 business days due to a port congestion issue, which caused a minor delay on our installation schedule. To their credit, the supplier proactively communicated the delay and provided daily shipping updates until the goods cleared customs. The material passed our incoming inspection without issues. Would consider ordering again but will build in extra buffer time for future projects.
Wei Chen
Singapore
2025-03-11
Perfect Checkered Coil for Mixed-Container Distribution
As a steel distributor serving Southeast Asian markets, we placed a mixed-container order covering four size combinations: 2.0mm/1000mm, 3.0mm/1219mm, 4.0mm/1250mm, and 6.0mm/1500mm — all diamond pattern, totaling 22 tons. The supplier handled the mixed-order logistics without any confusion; each coil was clearly tagged with thickness, width, and heat number matching the respective MTC. Pattern dimensions were uniform across all four specs, which matters for our end customers who use these for walkway and platform work. Received full documentation package — MTC, packing list, and CO — within 2 days of vessel loading. This is our fourth consecutive order. Consistent quality makes reselling straightforward.
Carlos Silva
Brazil
2025-04-04
Reliable Checkered Coil Supply for Ramp Fabrication
We purchased 7 tons of Q235B checkered coil in 2.5mm thickness, 1250mm width for fabricating access ramps at mining sites in Minas Gerais. Material performed well in our bend tests and welding trials — no cracking at 90-degree cold bends. The oiled surface kept corrosion at bay during the 28-day sea transit to Santos port. Compared quotes from three suppliers; this one offered the best FOB price with MTC included at no extra cost. Lead time was 8 business days from stock, as stated. The only reason for 4 stars rather than 5 is that the packing list had a minor weight discrepancy versus actual coil weights — resolved quickly via email. Will order again for our next project phase.
William Taylor
Australia
2025-04-28
Premium Checkered Coil for Ship Deck Plating
Sourced 20 tons of carbon steel checkered coil across two thicknesses — 5.0mm and 8.0mm — with diamond pattern and pickled & oiled surface treatment for ship deck plating on two coastal vessels. The P&O surface treatment was consistently applied with no bare spots observed during incoming inspection. Yield strength on both thickness runs came in at 241–252 MPa range, well above the 235 MPa minimum. We specifically requested coil weights in the 10–12 ton range to suit our crane capacity, and the supplier accommodated without extra charge. CIF Melbourne delivery completed in 17 days. EN 10204 3.1 certificates were pre-sent digitally before vessel departure — very professional handling. This is our second order and quality has been consistent.
Ahmed Al-Hassan
UAE
2025-05-16
Good Value Checkered Coil for Loading Dock Application
Ordered 8 tons of SS400 equivalent checkered coil in 3.5mm thickness, 1000mm width for loading dock surface replacement at a logistics facility in Dubai. Material quality was solid — anti-slip pattern performed well under forklift traffic testing. MTC documents were accurate and accepted by our site engineer without issue. Pricing was competitive compared to local UAE stockists. Only minor point: one coil had slightly uneven edge trimming on the slit width, though the supplier arranged a credit adjustment promptly. Delivery was 13 business days to Jebel Ali port. Overall a reliable supplier and we plan to reorder.
Hans Mueller
Germany
2025-06-02
Outstanding Dimensional Consistency on Custom-Rolled Checkered Coil
Placed an order for 10 metric tons of checkered coil, 6.0mm base thickness, 1500mm width, lentil pattern, to fabricate truck bed flooring for agricultural equipment. This was a custom specification outside standard stock, and production was completed in 24 days — within the 20–30 day lead time as quoted. Dimensional tolerances on thickness were within ±0.15mm across the entire coil run, which is critical for our CNC blanking line. Tensile strength reported at 430 MPa on the 3.1 MTC. Packaging was solid — coils arrived with no moisture damage on CFR Hamburg terms. Will be placing a follow-up order for 15 tons next quarter.
James Wilson
United Kingdom
2025-06-24
Superior Checkered Coil Quality for Stairway Tread Fabrication
We sourced 12 tons of carbon steel checkered coil in 3.0mm and 5.0mm thicknesses (1219mm width, teardrop pattern) for stairway tread production across a commercial construction project in Manchester. Surface finish was oiled and arrived in excellent condition — no rust, no edge burrs. Chemical composition on the MTC matched ASTM A36 equivalent specs precisely. The cut-to-length processing service saved us significant on-site labor; sheets arrived ready for immediate installation. Delivery completed in 11 days from order confirmation. Communication from the sales team was responsive throughout — PI issued within 4 hours of inquiry.
Michael Johnson
United States
2025-07-09
Excellent Checkered Coil for Industrial Platform Project
Ordered 18 tons of Q235B checkered coil in 4.5mm thickness, 1250mm width with diamond (5-bar) pattern for mezzanine decking at our automotive plant. Mill test certificates confirmed yield strength at 248 MPa, fully compliant with GB/T 3277-2009. Pattern height measured consistently at 1.2mm above base surface across all coils — zero variation issues. Delivered in 9 business days, right within the quoted window. MTC per EN 10204 Type 3.1 was included without us even asking. We compared quotes from 4 suppliers before choosing this one — best price-to-quality ratio by a clear margin. Third order this year and we'll keep coming back.
了解供应商
可定制
超低价
$610
1-49 吨
基准价
$583
50-99 吨
4.4% 优惠
$570
≥100 吨
6.6% 优惠
价格有效期：随行就市
付款与交货
- 交期：
- 随报价一并确认
- 包装：
- 标准出口包装
- 样品：
- 可按需提供
