English 
Español 
Français 
Deutsch 
Português (Brasil) 
Русский 
العربية 
花纹钢板卷用于地板 - 高强度防滑地板解决方案
百曲钢卷制造有限公司
已认证
定制生产厂家
·
4 年
·
China
China
可定制
超低价
$595
1-49 吨
基准价
$569
50-99 吨
4.4% 优惠
$556
≥100 吨
6.6% 优惠
价格有效期：随行就市
付款与交货
- 交期：
- 随报价一并确认
- 包装：
- 标准出口包装
- 样品：
- 可按需提供
产品详情
花纹钢板卷技术规格
| 属性 | 参数 | 描述 |
|---|---|---|
| 产品名称 | Checkered Steel Coil for Floor | 带凸起菱形/泪滴形花纹的热轧碳钢卷 |
| 材质等级 | SS400 / Q235B / A36 / S235JR | 常见碳钢等级等效牌号 |
| 标准符合性 | GB/T 3277, JIS G3131, ASTM A786, EN 10025 | 符合主要国际花纹板标准 |
| 碳 (C) | ≤0.20% | 碳含量，兼顾成形性与焊接性 |
| 锰 (Mn) | ≤1.40% | 提高强度与韧性 |
| 磷 (P) | ≤0.045% | 受控以改善延展性 |
| 硫 (S) | ≤0.045% | 低硫含量以改善焊接性 |
| 硅 (Si) | ≤0.35% | 脱氧剂，保证钢材洁净度 |
| 抗拉强度 | 370 - 500 MPa | 按基材等级划分的典型范围 |
| 屈服强度 | ≥235 MPa | 结构用最低屈服强度 |
| 延伸率 | ≥26% | 50mm 标距下的延展性 |
| 基板厚度 | 1.5 - 8.0 mm | 不含花纹高度的基板厚度 |
| 花纹高度 | 0.5 - 2.0 mm | 基板表面以上凸起花纹的高度 |
| 钢卷宽度 | 1000 - 1500 mm | 可提供标准宽度，可按需定制 |
| 花纹类型 | Diamond, Tear Drop, Five-bar, Lentil | 适用于地面应用的防滑花纹选项 |
| 表面处理 | Oiled, Pickled, Galvanized | 防腐及表面处理选项 |
| 应用 | Industrial flooring, staircase treads, vehicle platforms, walkways | 建筑与交通运输中的防滑地面 |
| 认证 | ISO 9001, EN 10204 3.1, SGS | 随货提供质量认证 |
| 包装 | 天眼包装、钢带捆扎、防水纸 | 标准适航出口包装 |
| 最小起订量 | 5吨 | 每规格最小起订量 |
花纹钢板卷用于地板 - 高强度防滑地板解决方案
用于地面的花纹钢卷是一种热轧碳钢产品，其一面带有凸起的菱形或泪滴形花纹，专为在工业和商业地面应用中提供卓越的防滑性能而设计。该材料在人行通道、夹层平台、车辆坡道和仓库地面等对行人和设备安全至关重要的场合发挥着关键作用。作为直接钢厂供应商，我们为全球建筑承包商、钢构加工商和工业项目开发商提供优质花纹钢卷，具有花纹深度一致、厚度公差严格和出厂价具有竞争力的优势。
什么是用于地面的花纹钢卷？
用于地面的花纹钢卷是一种在热轧过程中于表面压印凸起花纹的连续轧制钢带。该花纹——通常为五条筋菱形、泪滴形或扁豆形配置——与光滑平钢板相比可将摩擦系数提高30–50%，使其成为防滑地面系统的首选。该产品按照GB/T 3277-2006和JIS G3131标准制造，基材牌号包括Q235B、SS400和ASTM A36。
用于地面的花纹钢卷技术规格
我们的花纹地面钢卷采用精确的尺寸控制生产，以满足严苛的项目要求。以下是标准技术参数：
| 参数 | 规格范围 |
|---|---|
| 基板厚度 | 1.5 mm – 8.0 mm |
| 花纹高度 | 0.5 mm – 2.0 mm（依据 GB/T 3277） |
| 卷宽 | 1000 mm – 1500 mm |
| 卷重 | 每卷 3 MT – 15 MT |
| 钢种 | Q235B, SS400, ASTM A36, S235JR |
| 屈服强度 | ≥235 MPa（Q235B 依据 GB/T 700-2006） |
| 抗拉强度 | 370–500 MPa |
| 花纹类型 | 菱形 / 五条筋 / 泪滴形 / 扁豆形 |
| 表面处理 | 可提供涂油、酸洗或镀锌 |
花纹钢卷在地面铺设中的主要应用
- 工业平台和走道：石油化工厂、发电站和钢厂，这些场所因油和水暴露而需要可靠的防滑性能
- 车辆坡道和装卸货台：用于叉车和重型卡车通行的防滑表面，每轴载荷超过 5 吨
- 夹层和楼梯踏板：需要符合 OSHA 防滑指南的商业仓库和物流中心
- 造船甲板：船用级花纹地板钢卷，可选热浸镀锌，在腐蚀性环境中具有卓越的耐久性
常见问题
花纹钢卷的最小起订量（MOQ）是多少？
我们的标准 MOQ 为每种规格 5 公吨。对于混合钢种或多厚度订单，我们接受总计 10 MT 起的组合数量。
你们提供材质证明书吗？
是的，每批货物均附有 EN 10204 Type 3.1 工厂测试证书，涵盖化学成分、力学性能、花纹高度测量和尺寸验证。
地板级花纹钢卷的典型交货时间是多少？
标准库存商品在7–10个工作日内发货。用于地板项目的定制厚度或镀锌花纹钢卷，需在订单确认后20–30天发货。
你们能供应按定制尺寸切割的花纹钢卷吗？
当然可以。我们提供定制宽度分条（最小200 mm）以及公差为±1 mm的定尺开平加工，可直接安装在地板框架上。
获取用于地板的花纹钢卷有竞争力的报价
无论您是需要用于仓库扩建的标准五条筋花纹钢卷，还是用于海洋工程的镀锌花纹地板钢卷，我们的技术销售团队都随时为您提供帮助。今天就联系我们，告知您所需的牌号、厚度、宽度和数量，即可获得包含钢厂直销价格和灵活交货方案的详细报价。
评分与评价
Wei Chen
Singapore
2025-01-29
Reliable Checkered Floor Coil for Regional Distribution Projects
We placed a combined order of 25 tons across multiple specs — 2mm, 3mm, and 4mm Q235B checkered coils, widths from 1000mm to 1500mm — for resale to fabricators in Southeast Asia. As a trading company, consistency across coils is critical for us. Pattern height and thickness tolerances were uniform across all three thickness specs, which made our downstream customers satisfied. EN 10204 3.1 certificates were provided per coil bundle. Pricing was competitive for the volume, though MOQ flexibility for individual specs could be improved — we had to consolidate orders to meet the 10 MT mixed-grade minimum. Delivery in 14 business days to Singapore port. Overall a dependable supplier for regional distribution.
Chris Martin
Canada
2025-02-21
Acceptable Checkered Coil Quality — Minor Packaging Issue Resolved
Ordered 7 tons of Q235B checkered steel coil, 2.5mm thickness, 1200mm width for walkway panels at a mining facility in Alberta. Material quality itself was fine — yield strength on certificate at 241 MPa, pattern depth consistent, oiled surface in good condition. However, two coils arrived with minor edge dents from inadequate inner sleeve protection during transit. Reported to the sales team and they responded within 4 hours, offered partial credit and improved packaging on the replacement shipment. The replacement arrived in 8 days. Mechanical properties and dimensions were not affected by the packaging issue. Appreciated the responsive after-sales handling. Will consider reordering with the updated packaging confirmed.
Carlos Silva
Brazil
2025-03-17
Excellent Checkered Coil for Staircase Treads and Mezzanine Platforms
Sourced 14 tons of Q235B checkered steel coil, 2mm and 3mm mixed thickness, 1000mm width, five-bar pattern for staircase tread fabrication and mezzanine decking across three warehouse projects in São Paulo. Pattern height on the 3mm coil measured 1.5mm — consistent with GB/T 3277 specification. We requested cut-to-length sheets at 2400mm and the tolerance came in at ±0.8mm, better than the ±1mm stated. The technical team helped us select the correct thickness for each application based on load calculations, which saved us engineering time. Certificates included chemical composition and pattern height measurement records. Delivery in 13 business days. Will continue ordering for ongoing projects.
Ahmed Al-Hassan
UAE
2025-04-14
Superior Checkered Steel Coil for Loading Dock Flooring
Our company ordered 20 tons of ASTM A36 checkered steel coil across two thicknesses — 4mm and 6mm, both 1500mm width — for loading dock platforms at a distribution center in Dubai. The heavier 6mm coil handled our forklift traffic spec of 6-ton axle loads with no issues during installation review by our structural engineer. Mill test certificates showed carbon content and mechanical properties fully compliant with ASTM A36 requirements. Coil weights were consistent between 12–14 MT per coil, making handling straightforward. Delivery completed in 10 business days to Jebel Ali port. This is our second order with this supplier and quality has been consistent both times.
William Taylor
Australia
2025-05-12
Premium Galvanized Checkered Coil for Shipbuilding Deck Application
We required 10 tons of hot-dip galvanized checkered steel coil, 3mm base thickness, diamond pattern, 1200mm width for deck flooring on a coastal patrol vessel build. The galvanizing coating was even and well-adhered — we did spot cross-section checks and coating thickness averaged 85 microns. EN 10204 3.1 certificates covered both base metal mechanical properties and galvanizing compliance. Lead time for the galvanized product was 24 days from order confirmation, which matched exactly what was quoted. The slitting to 900mm custom width was accurate to within 0.8mm. Compared to our previous supplier in Korea, the pricing was 7% lower with equivalent quality. Highly satisfied.
Hans Mueller
Germany
2025-06-02
Good Value Checkered Floor Coil for Industrial Ramps
Purchased 8 tons of SS400 checkered coil, 5mm thickness, 1500mm width for vehicle ramp fabrication at a logistics depot. Material quality was solid — tensile strength confirmed at 420 MPa on the test certificate, within the 370–500 MPa range stated. Pattern depth was uniform. Pricing was competitive compared to our local European distributors. Minor point: custom slit width of 750mm took 3 extra days beyond the quoted lead time, though the team communicated proactively about the delay. Final delivery at 23 days total. Would order again for standard stock widths.
James Wilson
United Kingdom
2025-06-24
Outstanding Quality Checkered Coil for Petrochemical Walkways
We sourced 12 tons of 3mm Q235B checkered steel coil, 1000mm width, tear-drop pattern for elevated walkways at a petrochemical facility in Teesside. The anti-slip performance is exactly what our safety team required — coefficient of friction tests on-site confirmed the pattern performs reliably even with oil and water exposure. Thickness tolerance was within ±0.15mm across all coils checked. Technical sales team responded to our spec queries within 2 hours and provided a detailed datasheet before we committed. Shipment arrived in 11 days. Certificates covered chemical composition and dimensional verification. This will be our standard supplier for platform flooring going forward.
Michael Johnson
United States
2025-07-09
Excellent Checkered Steel Coil for Warehouse Flooring Project
Ordered 18 tons of Q235B checkered steel coil, 4mm base thickness, 1250mm width, five-bar diamond pattern for a large warehouse mezzanine expansion. Pattern height measured consistently at 1.2mm across the entire coil — fully within GB/T 3277 spec. EN 10204 3.1 mill certificates were included with every bundle, showing yield strength at 248 MPa, well above the 235 MPa minimum. Surface was cleanly oiled with no rust spots or edge burrs. Delivered in 9 business days, right on schedule. We compared quotes from 4 suppliers and this was the most competitive mill-direct pricing we found. Will be placing a follow-up order for the second phase of this project.
了解供应商
可定制
超低价
$595
1-49 吨
基准价
$569
50-99 吨
4.4% 优惠
$556
≥100 吨
6.6% 优惠
价格有效期：随行就市
付款与交货
- 交期：
- 随报价一并确认
- 包装：
- 标准出口包装
- 样品：
- 可按需提供
