English 
Español 
Français 
Deutsch 
Português (Brasil) 
Русский 
العربية 
货船钢板 - 用于船舶建造的船级钢板
快马钢铁有限公司
已认证
定制生产厂家
·
7 年
·
China
China
可定制
超低价
$620
1-49 吨
基准价
$595
50-99 吨
4% 优惠
$580
≥100 吨
6.5% 优惠
价格有效期：随行就市
付款与交货
- 交期：
- 随报价一并确认
- 包装：
- 标准出口包装
- 样品：
- 可按需提供
10毫米船板
$605 - $650
1 吨 （最小起订量）
造船钢板规格
$540 - $580
1 吨 （最小起订量）
DH36船板
$610 - $655
1 吨 （最小起订量）
造船用钢板牌号
$525 - $565
1 吨 （最小起订量）
船用钢板
$580 - $625
1 吨 （最小起订量）
Rina造船钢板
$640 - $685
1 吨 （最小起订量）
造船用AH36钢板价格
$675 - $725
1 吨 （最小起订量）
货船板
$580 - $620
1 吨 （最小起订量）
造船钢板供应商
$555 - $595
1 吨 （最小起订量）
船用低碳钢板
$530 - $565
1 吨 （最小起订量）
造船用优质钢板
$540 - $580
1 吨 （最小起订量）
批发造船钢板
$560 - $600
1 吨 （最小起订量）
产品详情
货船板技术规范
| 属性 | 参数 | 描述 |
|---|---|---|
| 产品名称 | 货船船板 | 用于船体建造的船用级钢板 |
| 材料牌号 | AH32, DH32, EH32, AH36, DH36, EH36 | 船级社认可的牌号 |
| 标准合规 | ASTM A131, EN 10025-2, GB/T 712 | 国际船用钢材标准 |
| 碳 (C) | ≤0.18% | 为可焊性和韧性进行控制 |
| 锰 (Mn) | 0.90-1.60% | 提高强度和淬透性 |
| 硅 (Si) | 0.10-0.50% | 脱氧剂及强度贡献元素 |
| 磷 (P) | ≤0.035% | 为延展性进行控制 |
| 硫 (S) | ≤0.035% | 低硫以改善可焊性 |
| 抗拉强度 | 440-590 MPa | 各牌号的最低抗拉强度 |
| 屈服强度 | ≥315 MPa (AH32/DH32/EH32) | 最低屈服强度因牌号而异 |
| 延伸率 | ≥22% | 50mm 标距长度下的延展性 |
| 冲击功 | ≥34J at -20°C (DH32), -40°C (EH32) | 夏比 V 型缺口冲击试验要求 |
| 厚度范围 | 6mm - 150mm | 可提供的钢板厚度选项 |
| 宽度范围 | 1500mm - 4000mm | 标准及定制宽度 |
| 长度范围 | 6000mm - 18000mm | 标准及定制长度 |
| 表面状态 | 热轧、正火、TMCP | 可提供多种制造工艺 |
| 应用 | 船体、甲板、舱壁、海上平台 | 船舶及海洋工程建造 |
| 认证 | ABS, DNV-GL, LR, BV, CCS, NK | 船级社认证 |
| 包装 | 钢带捆扎，防水覆盖 | 适合海运的出口包装 |
| MOQ | 10 tons | 最小起订量 |
货船钢板 - 用于船舶建造的船级钢板
货船板代表了一类专为船舶建造和海事应用而设计的船用级钢板。这种结构钢材料在建造货舱、船体结构和甲板组件中发挥着关键作用，在这些应用中，卓越的强度重量比、在盐水环境中的优异耐腐蚀性以及符合国际海事标准至关重要。造船厂、海洋工程公司和船舶维修设施依赖这些优质钢板来确保在严苛海洋条件下的结构完整性和运营安全。
什么是货船板？
货船板是按照ABS、DNV-GL、Lloyd's Register和Bureau Veritas等船级社规范制造的高强度结构钢产品。这些船用级钢板具有受控的化学成分，碳含量通常限制在最高0.18%，锰含量范围为0.90-1.60%，并含有特定的微合金元素，可增强焊接性和在低至-40°C的低温下的冲击韧性。
货船板技术规格
用于货船的船用级钢板按照ASTM A131/A131M标准制造，牌号包括AH32、DH32、EH32和FH32，表示最低屈服强度为315 MPa。厚度范围为6mm至150mm，宽度可达4,000mm，长度可延伸至18,000mm。根据船级社要求，该材料的抗拉强度在440-590 MPa之间，在指定试验温度下夏比V型缺口冲击功超过27J。
为什么选择我们的船用级钢板
我们的货船钢板生产设施持有主要船级社的认证，并提供钢厂直销的价格优势。每张钢板均按照 ASTM A435 标准进行超声波检测，并通过炉号文件实现完整的材料可追溯性。我们提供全面的工厂测试证书，包括化学成分分析报告、力学性能验证和冲击试验结果。我们的制造工艺采用控制轧制和加速冷却技术，优化晶粒结构以获得优异的厚度方向性能。
常见问题
最小起订量（MOQ）是多少？
我们的货船钢板标准最小起订量为每种规格 25 公吨。对于 EH36 或更高强度等特殊牌号，我们可接受 15 公吨起的订单。当合计吨位达到 25 吨门槛时，可接受混合牌号订单，使船厂能够为多个船体部分合并采购。
你们提供材料测试证书吗？
我们提供由认证第三方检验机构签发的全面 EN 10204 Type 3.1 工厂测试证书。文件包括每炉的化学成分分析、通过拉伸和冲击试验进行的力学性能验证、按 ASTM A435 进行的超声波检查记录以及尺寸检验报告。来自 ABS、DNV-GL、Lloyd's Register 或 Bureau Veritas 的船级社证书可在下单时按要求提供。
典型的交货时间是多少？
AH32 和 DH32 规格的标准级货船钢板，厚度在 10-50mm 之间，通常有现货，交货期为 15-20 个工作日。更高强度等级或非标准尺寸的定制轧制钢板，从订单确认起需要 45-60 天，包括生产排程、质量检测和船级社验船师检验。针对紧急船舶维修需求，可安排加急生产，但需支付加急排程费用。
能否按定制尺寸切割？
我们的加工厂提供精密切割服务，使用 CNC 等离子和氧燃料切割设备，线性尺寸公差为 ±3mm。在切割复杂船体板几何形状时，我们提供套料优化以最大限度减少材料浪费。可根据焊接工艺规程提供 30° 至 45° 角度的坡口加工服务，用于焊接准备。对于关键结构应用，可进行边缘铣削和表面打磨，以达到每米 5mm 的所需平整度公差。
获取货船钢板有竞争力的报价
立即联系我们的船用钢材专家，获取针对您船舶建造需求的工厂竞争性货船钢板价格。我们的技术销售团队在等级选择、尺寸优化和船级社认证流程方面提供专业指导。索取详细报价，包括工厂测试证书样本、交货时间表和您造船项目的物流协调。我们提供灵活的付款条件和全面的售后支持，确保您的船舶建造时间表按计划推进。
评分与评价
John Patterson
United States
2025-09-18
Acceptable Quality with Initial Documentation Delay
Purchased 16 tons of AH32 cargo ship plate (14mm thickness, 2000mm width) for barge construction project. Material quality met ASTM A131 specifications after resolution of initial documentation issues. Original mill certificates had minor discrepancies in heat number cross-referencing which required clarification and reissue. Supplier corrected certificates within 5 days and provided ABS endorsement. Mechanical properties were satisfactory with yield strength at 328 MPa. Once documentation was resolved, material performed adequately in fabrication. Recommend confirming certificate accuracy upon order placement.
Robert MacLeod
Canada
2025-10-01
Perfect AH32 Stock Material for Multiple Projects
Secured 35 tons of AH32 marine grade plate from stock inventory in various thicknesses (8mm, 10mm, 12mm, 15mm) for our shipyard's ongoing repair contracts. Immediate availability was crucial as we serve emergency repair market. All plates carried valid Lloyd's Register certification less than 6 months old. Chemical composition uniformity across different heats was impressive. Nesting optimization service reduced our material waste by 12% compared to standard rectangular cutting. This supplier has become our preferred source for stock marine plate requirements.
Wei Zhang
Singapore
2025-10-23
Solid Quality DH36 with Reasonable Lead Time
Ordered 20 tons of DH36 cargo ship plate in 22mm thickness for general cargo vessel hull sections. Material certificates showed carbon content at 0.15%, silicon at 0.32%, meeting all DNV-GL requirements. Tensile strength at 485 MPa, slightly lower than some premium suppliers but adequate for our application. Ultrasonic testing results were satisfactory. Delivery completed in 19 days. Price point was 8% lower than European suppliers. Good option for projects with moderate budget constraints where standard classification compliance is sufficient.
Carlos Mendes
Brazil
2025-11-15
Reliable FH32 Plates with Fast Technical Support
Purchased 25 tons of FH32 grade marine steel plate (thickness 30mm, width 3000mm) for offshore support vessel construction. Technical sales team provided expert guidance on grade selection versus our initial EH36 specification, resulting in cost savings without compromising performance. ABS certification documentation was comprehensive including heat treatment records. Controlled rolling process evident in fine grain structure. Material arrived at Santos port in 52 days including ocean freight. Responsive customer service answered technical queries within 24 hours throughout the procurement process.
Ahmed Al-Mansouri
UAE
2025-11-28
Good Value AH36 Plates for Repair Works
Ordered 18 tons of AH36 cargo ship plate in mixed thicknesses (10mm, 14mm, 16mm) for emergency vessel repair operations. Pricing was competitive compared to five other suppliers we contacted. Mill test certificates showed all properties within specification. Delivery took 22 days, slightly longer than the quoted 15-20 days due to classification society surveyor scheduling. Material quality was solid with good weldability. Minor surface scratches on two plates but did not affect structural performance. Would order again for non-critical applications.
Hans Bergmann
Germany
2025-12-10
Premium EH36 Material for Specialized Cargo Hold
Sourced 22 tons of EH36 high-strength cargo ship plate (20mm thickness) for chemical tanker cargo hold reinforcement project. Material exhibited exceptional through-thickness properties with Z25 quality per EN 10164. Impact toughness at -40°C reached 42J average across three specimens. Bureau Veritas certification provided within 48 hours of request. Surface finish was outstanding with flatness tolerance under 4mm per meter. Beveling service at 37.5° angle perfectly matched our welding procedure specifications.
James Robertson
United Kingdom
2026-01-02
Outstanding DH32 Plates with Superior Mill Certificates
We purchased 28 tons of DH32 marine grade steel plate (thickness range 15-25mm, width 2500mm) for container vessel deck construction. EN 10204 Type 3.1 certificates included detailed chemical analysis and mechanical property verification. Tensile strength measured at 512 MPa, yield strength at 348 MPa, both exceeding classification requirements. Lloyd's Register surveyor inspection completed at mill. CNC plasma cutting service provided excellent edge quality with ±2mm tolerance. This is our fourth consecutive order over 18 months.
Michael Thompson
Australia
2026-01-15
Excellent AH32 Cargo Ship Plate for Bulk Carrier Retrofit
Ordered 32 tons of AH32 grade cargo ship plate in 12mm and 18mm thicknesses for our bulk carrier hull repair project. Chemical composition showed carbon at 0.16%, manganese at 1.42%, fully meeting ASTM A131 requirements. DNV-GL certificates provided with complete heat traceability. Charpy impact tests at -20°C exceeded 34J. Ultrasonic testing per ASTM A435 showed zero defects. Delivered to our Sydney shipyard in 18 days. Material performed excellently during welding operations with no cracking issues.
了解供应商
可定制
超低价
$620
1-49 吨
基准价
$595
50-99 吨
4% 优惠
$580
≥100 吨
6.5% 优惠
价格有效期：随行就市
付款与交货
- 交期：
- 随报价一并确认
- 包装：
- 标准出口包装
- 样品：
- 可按需提供
