English 
简体中文 
CN
| Property | Parameter | Description |
|---|---|---|
| Product Name | Prime Quality Corten Steel Coil | Weathering resistant steel coil with protective patina |
| Material Grade | ASTM A588 / A242 / SPA-H / S355J2WP | International weathering steel grade equivalents |
| Standard Compliance | ASTM A606, EN 10025-5, JIS G3125 | Meets major international weathering steel standards |
| Carbon (C) | ≤0.12% | Low carbon for improved weldability |
| Silicon (Si) | 0.25-0.75% | Enhances oxidation resistance |
| Manganese (Mn) | 0.20-0.50% | Improves strength and toughness |
| Chromium (Cr) | 0.50-1.25% | Key element for atmospheric corrosion resistance |
| Copper (Cu) | 0.25-0.55% | Promotes protective patina formation |
| Phosphorus (P) | 0.07-0.15% | Enhances weathering resistance |
| Nickel (Ni) | ≤0.65% | Improves toughness and corrosion resistance |
| Tensile Strength | ≥485 MPa | Minimum tensile strength per ASTM A588 |
| Yield Strength | ≥345 MPa | Minimum yield strength |
| Elongation | ≥18% | Ductility in 200mm gauge length |
| Thickness Range | 1.5 - 25 mm | Available coil thickness options |
| Width Range | 1000 - 2000 mm | Standard and custom widths available |
| Coil Weight | 5 - 30 tons | Standard coil weight range |
| Surface Finish | Pickled, Oiled, Mill Finish, Pre-weathered | Multiple surface treatment options |
| Application | Architecture, Bridges, Containers, Facades | Outdoor structural and decorative applications |
| Certification | EN 10204 3.1, ISO 9001, Mill Test Certificate | Quality certifications provided |
| MOQ | 5 tons | Minimum order quantity |
Acceptable Corten Coil Quality — Delivery Delay Resolved
Ordered 10 tons of Corten B coil, 5mm thickness, 1800mm width for an outdoor industrial enclosure project in Alberta. Material properties on the MTC were compliant with ASTM A588 and mechanical test values were within specification. However, the shipment arrived 6 days beyond the initially quoted 20-day lead time due to port scheduling issues, which caused a minor delay in our fabrication start. The supplier communicated the delay proactively and provided revised tracking information. No quality defects were found upon inspection and the EN 10204 3.1 certificates were complete. The issue appears to have been a logistics exception rather than a systemic problem. We would consider reordering with earlier lead time buffer built into our schedule.
Ordered 10 tons of Corten B coil, 5mm thickness, 1800mm width for an outdoor industrial enclosure project in Alberta. Material properties on the MTC were compliant with ASTM A588 and mechanical test values were within specification. However, the shipment arrived 6 days beyond the initially quoted 20-day lead time due to port scheduling issues, which caused a minor delay in our fabrication start. The supplier communicated the delay proactively and provided revised tracking information. No quality defects were found upon inspection and the EN 10204 3.1 certificates were complete. The issue appears to have been a logistics exception rather than a systemic problem. We would consider reordering with earlier lead time buffer built into our schedule.
