Plug And Play Fiber Cable For Fast Network Deployment

Anxun optical fiber Co., Ltd.
Verified Custom manufacturer 7yrs CN CN

Ratings & Reviews

5.0
Very satisfied
Based on 8 reviews for verified purchases
Supplier service
5.0
On-time shipment
5.0
Supplier service
5.0
2025-02-01
Minor connector cap issue on first shipment — resolved promptly
Ordered 450 SC-APC OS2 assemblies (LSZH, 10 m) for an outdoor FTTH distribution project. On arrival, approximately 15 units had loose dust caps that had shifted during transit, raising contamination concerns before installation. Contacted support immediately — they arranged an expedited replacement shipment for the affected units within 5 business days and provided a prepaid return label. Post-replacement inspection confirmed all connectors met the ≥60 dB APC return loss spec. The resolution was handled professionally. Packaging has apparently been reinforced since then. Cautiously optimistic for our next order.
2025-02-22
Solid LC-LC OM3 assemblies at competitive wholesale pricing
Sourced 900 LC-LC OM3 multimode assemblies in PVC jacket, 2 m and 5 m lengths, for a series of enterprise LAN deployments across six sites. Performance met ITU-T and TIA-568 specifications without issue — insertion loss consistently under 0.2 dB. Pricing was noticeably better than our previous UK distributor for equivalent volume. Docking one star because the technical datasheet provided initially lacked the bend radius specification we needed for our conduit routing design; the team sent an updated version within 24 hours once we flagged it. Good supplier overall.
2025-03-16
Good value on bulk MPO assemblies — slight lead time variance on large order
Purchased 1,200 MPO-12 OS2 single-mode assemblies (lengths 1 m to 15 m) for a telecom backbone project in Dubai. Optical performance was solid — insertion loss averaged 0.14 dB and all units passed our incoming IEC 61300-3-35 inspection. Wholesale pricing was competitive for the volume. The only reason for 4 stars rather than 5 is that delivery on the larger quantity took 19 days versus the estimated 14. Not a project-critical delay, but worth noting for tight scheduling. Overall quality-to-price ratio is strong and we will order again.
2025-04-07
24/7 technical support made a real difference during our night-shift installation
Ordered 320 units of MTP-24 OM5 wideband multimode assemblies for a new co-location facility. During our overnight installation window, we had a configuration question about polarity management for our 40G/100G switch connections. The engineering support team responded within 20 minutes at 2 a.m. and provided a clear wiring diagram. Product performance was excellent — return loss UPC above 52 dB across all tested connectors. Full TIA-568 compliance docs included. Delivery to Sydney took 16 days from order, which met our schedule.
2025-04-29
ISO cleanroom manufacturing gives us the traceability our auditors require
Procured 600 LC-APC OS2 pigtail assemblies for a regional ISP infrastructure project subject to strict German regulatory audit requirements. The ISO-certified cleanroom production documentation and interferometry end-face inspection reports satisfied our compliance team without any additional back-and-forth. Operating temperature rating of -40°C to +85°C was critical for our outdoor cabinet installations. Insertion loss measured at 0.13 dB average on our OTDR verification. Shipment arrived in 11 days, well-packaged with individual connector caps intact. Will standardize on this supplier going forward.
2025-05-21
Reliable supplier for bulk campus network fiber — third order placed
This is our third bulk purchase — 1,800 SC-SC OS2 assemblies in 10 m and 20 m lengths for a university campus network upgrade. Consistent quality batch after batch, with RoHS and REACH compliance certificates always included. Armored jacket option handled our outdoor inter-building runs perfectly. Pricing on repeat orders has been competitive, and the account manager proactively flagged a lead time change before it became an issue. That kind of communication is rare and genuinely valued. Highly recommended for large-scale campus projects.
2025-06-12
Pre-terminated MPO assemblies cut our FTTH deployment time by 40%
Deployed 800 units of MPO-12 OM4 multimode harnesses across a large FTTH rollout in three cities. The factory-polished APC connectors delivered return loss consistently above 62 dB — exceeding the ≥60 dB specification. No field splicing required, which eliminated a major bottleneck. Full ITU-T G.657 compliance documentation was provided without our having to ask. Technical support team responded within 2 hours to our configuration queries. Commissioning time dropped significantly compared to our previous supplier.
2025-06-27
Exceptional insertion loss performance for our hyperscale DC rollout
We sourced 2,400 units of LC-LC OS2 single-mode assemblies (3 m and 5 m lengths, LSZH jacket) for a hyperscale data center expansion. Measured insertion loss averaged 0.12 dB per connector — well within the ≤0.3 dB spec and consistent across all batches. IEC 61300-3-35 end-face inspection reports were included with every shipment. Delivery was completed in 14 days with zero damaged units. This level of optical consistency is exactly what our QA team demands. Already planning our next order.

Know your supplier

Anxun optical fiber Co., Ltd.

Manufacturer, Trading Company · 7 yrs on Sinoali.com

Located in China

Company overview

Year Established
2010
On-time delivery rate
100.0%
Online revenue
100.0%
Plant Area
>=2000m²
number of employees
80
Response Time
<=4h
FAQ

FAQ

Q: What is pre-terminated fiber cable?
A: Pre-terminated fiber cable is factory-assembled with connectors and pigtails already installed, ready for plug-and-play installation on site.
Q: What types of pre-terminated fiber do you supply?
A: We supply pre-terminated trunk cables, harness cables, fan-out cables, MPO/MTP cassettes and patch cords for data centers and FTTH projects.
Q: What fiber modes are available?
A: We offer both single-mode (OS1/OS2) and multi-mode (OM1/OM2/OM3/OM4/OM5) pre-terminated fiber solutions.
Q: What is the advantage of using pre-terminated fiber?
A: It reduces on-site splicing time, lowers installation cost, improves reliability, minimizes human error and speeds up project deployment.
Q: Are your pre-terminated cables tested before delivery?
A: Yes, each cable is 100% tested for insertion loss, return loss and continuity to ensure qualified performance.
Q: Do pre-terminated cables support outdoor or aerial use?
A: Yes, we provide waterproof, armored and UV-resistant pre-terminated cables suitable for outdoor and aerial applications.

Product display

Anxun Optical Fiber Co., Ltd. is a technology-driven enterprise specializing in the research, development, and manufacturing of high-quality optical fiber products and communication solutions. With a strong focus on innovation and precision engineering, the company provides a wide range of products, including fiber optic cables, connectivity components, and customized network solutions for telecommunications, data centers, and industrial applications.

Committed to international standards and strict quality control, Anxun ensures reliable performance and long-term durability in all its products. The company continuously invests in advanced production equipment and technical expertise to meet the evolving demands of global communication infrastructure. Guided by a customer-centric approach, Anxun Optical Fiber Co., Ltd. strives to deliver efficient, cost-effective, and sustainable solutions, building long-term partnerships with clients worldwide.

Customizable
Same product at rock bottom price
285$ 1-49kilometers Base price
273$ 50-99kilometers 4.2% discount
266$ ≥100kilometers 6.7% discount
Price validity period: Prices subject to market conditions

Supplier's customization ability

  • Drawing-based customization
  • Sample-based customization
  • Full customization
Quantity
Minimum order quantity: 1 kilometers
Shipping total: To be negotiated
Subtotal of Goods: US$ 285
Sinoali Order Guarantee
Secure payment

Secure payment PayPal Mastercard Visa AMEX Discover

Every payment you make on sinoali is secured through SSL encryption and PCI DSS data protection protocols.

Refund Guarantee

Refund Guarantee

If your order is not shipped, lost, or you discover a problem after receiving it, you can apply for a refund.

Shop Recommendation

Ultra low loss fiber

Ultra low loss fiber

$92 - $98

Min. order: 1 kilometers

Armored pre terminated fiber cable

Armored pre terminated fiber cable

$11955 - $12800

Min. order: 1 kilometers

Aerial Outdoor Optical Fiber

Aerial Outdoor Optical Fiber

$105 - $112

Min. order: 1 kilometers

Short distance multi-mode fiber

Short distance multi-mode fiber

$201 - $215

Min. order: 1 kilometers

Single mode bend insensitive fiber

Single mode bend insensitive fiber

$1196 - $1280

Min. order: 1 kilometers

Premium multimode optical fiber

Premium multimode optical fiber

$266 - $285

Min. order: 1 kilometers

Pre terminated fiber for outdoor use

Pre terminated fiber for outdoor use

$1728 - $1850

Min. order: 1 kilometers

Special optical fiber

Special optical fiber

$71 - $86

Min. order: 1 km

Mail
Mail
[email protected]
复制邮箱
Phone
Phone
+86 133 7058 6666
复制号码
Whatsapp
Whatsapp
+86 133 7058 6666
复制号码