English 
Español 
Français 
Deutsch 
Português (Brasil) 
Русский 
العربية 
Steel Plates for Industrial Buildings - Mill Direct
China
Supplier's customization ability
- Drawing-based customization
- Sample-based customization
- Full customization
Minimum order quantity: 1 ton
Shipping total: To be negotiated
- Lead time:
- confirmed with the quotation
- Packaging:
- standard export packing
- Samples:
- available on request
Product details
Technical Specifications of Steel Plates for Industrial Buildings
| Property | Parameter | Description |
|---|---|---|
| Product Name | Steel Plates for Industrial Buildings | Structural steel plates designed for industrial construction applications |
| Material Grade | A36 / A572 Gr.50 / S235JR / S355JR / Q235B / Q345B | International equivalents: A36≈S235JR≈Q235B; A572 Gr.50≈S355JR≈Q345B |
| Standard Compliance | ASTM A36 / ASTM A572 / EN 10025-2 / GB/T 700 / GB/T 1591 | Meets major international structural steel standards for building construction |
| Chemical Composition (C) | ≤ 0.26% (A36) / ≤ 0.23% (S355JR) | Carbon content controls weldability and strength |
| Chemical Composition (Mn, Si, P, S) | Mn: ≤ 1.60% / Si: ≤ 0.40% / P: ≤ 0.035% / S: ≤ 0.035% | Controlled alloying elements ensure structural integrity and low brittleness |
| Tensile Strength | 400–550 MPa (S235JR) / 470–630 MPa (S355JR) / 400–550 MPa (A36) | Per EN 10025-2 and ASTM A36/A572 standards |
| Yield Strength | ≥ 235 MPa (S235JR / Q235B) / ≥ 345 MPa (S355JR / Q345B) / ≥ 250 MPa (A36) | Minimum yield strength for structural load-bearing performance |
| Elongation | ≥ 20% (S235JR) / ≥ 20% (A36) / ≥ 19% (S355JR) | Measured on gauge length L0 = 5.65√S0; ensures ductility under load |
| Thickness Range | 3 mm – 150 mm | Wide thickness range covering floor plates, wall panels, and structural frames |
| Width Range | 1000 mm – 4500 mm | Available in standard and custom widths to suit industrial building layouts |
| Length Range | 2000 mm – 18000 mm | Cut-to-length service available; standard mill lengths upon request |
| Surface Finish | Hot-rolled (HR) / Blast-cleaned Sa 2.5 / Primer-coated | Surface treatment options to enhance corrosion resistance and paint adhesion |
| Application | Industrial warehouses, steel-framed factories, workshops, bridges, equipment platforms | Suitable for primary structural members, secondary framing, and cladding support |
| Certification | ISO 9001:2015 / CE Marking / Mill Test Certificate (EN 10204 3.1 / 3.2) | Full traceability with third-party inspection available (SGS, BV, TÜV) |
| Packaging | Bundled with steel strapping; wooden dunnage; seaworthy export packing available | Rust-preventive oil applied for long-distance shipping and outdoor storage |
| MOQ | 5 Metric Tons per grade/size | Mixed grades accepted for full container load (FCL) orders |
Steel Plates for Industrial Buildings - Mill Direct
Steel plates for industrial buildings form the structural backbone of warehouses, manufacturing facilities, power plants, and heavy-duty processing complexes worldwide. Sourcing these plates directly from the mill eliminates intermediary markups, ensuring cost-effective procurement without compromising on dimensional accuracy or mechanical performance. Modern industrial construction demands materials that can withstand dynamic loads, thermal cycling, and corrosive environments over decades of continuous service. Mill-direct steel plates deliver consistent chemistry, certified mechanical properties, and traceability documentation that third-party distributors often cannot guarantee. Whether your project calls for structural floor plates, load-bearing wall panels, or equipment base pads, selecting the correct grade—backed by full mill test reports—is critical to long-term structural integrity. Our facility supplies carbon and alloy steel plates to construction contractors, EPC firms, and procurement engineers across North America, Europe, and Asia, with lead times tailored to project schedules and order volumes ranging from single plates to multi-hundred-ton contracts.
What Are Steel Plates for Industrial Buildings?
Steel plates for industrial buildings are flat-rolled steel products typically ranging from 6 mm to 150 mm in thickness and up to 3,000 mm in width, produced to structural or pressure-vessel standards such as ASTM A36, ASTM A572 Grade 50, EN 10025 S355, or GB/T 1591 Q355B. They serve critical roles in column base plates, crane runway girders, mezzanine decking, and blast-resistant wall assemblies, providing the load-bearing capacity and weldability that industrial structures demand.
Steel Plates for Industrial Buildings – Technical Specifications
Our mill-direct industrial building steel plates meet the following verified parameters:
- Thickness range: 6 mm – 150 mm (±0.3 mm tolerance per EN 10029 Class B)
- Width range: 1,000 mm – 3,000 mm; length up to 12,000 mm
- Yield strength: 250 MPa (ASTM A36) to 690 MPa (ASTM A514)
- Tensile strength: 400 MPa – 895 MPa depending on grade
- Charpy impact: 27 J minimum at −20 °C for S355J2 grade
- Density: 7.85 g/cm³ at 20 °C
- Surface finish: As-rolled, shot-blasted Sa 2.5, or primer-coated
- Certifications: ISO 9001:2015, CE marking, NACE MR0175 compliance available
All plates are ultrasonically tested per ASTM A578 Level C and supplied with EN 10204 3.1 mill test reports, ensuring full chemical and mechanical traceability for structural engineering review boards.
Get a Competitive Quote for Steel Plates for Industrial Buildings
Ready to procure mill-direct steel plates for your next industrial building project? Our technical sales team evaluates your specifications—grade, thickness, quantity, and delivery schedule—to deliver a tailored, cost-effective proposal within 24 hours. Bulk orders receive priority mill scheduling and preferential freight rates.
- 24/7 customer support available
- Free samples for quality evaluation
- Competitive pricing for bulk orders
- Professional technical consultation
Contact us today to get your free quote within 24 hours!
