English 
简体中文 
CN
| Property | Parameter | Description |
|---|---|---|
| Product Name | Small Coil Galvanized Steel | Hot-dip or electro-galvanized low carbon steel in small coil form |
| Base Material | Q195 / Q235 / SAE 1006 / SAE 1008 | Low carbon steel substrate grades |
| Standard Compliance | ASTM A653, EN 10346, JIS G3302, GB/T 2518 | Meets major international galvanizing standards |
| Galvanizing Process | Hot-Dip Galvanized (HDG) / Electro-Galvanized (EG) | Zinc coating method options |
| Zinc Coating Weight | 30 - 275 g/m² | Coating weight per side, customizable |
| Carbon (C) | ≤0.15% | Low carbon content for formability |
| Manganese (Mn) | ≤0.60% | Provides moderate strength |
| Phosphorus (P) | ≤0.035% | Controlled for ductility |
| Sulfur (S) | ≤0.035% | Low sulfur for improved weldability |
| Tensile Strength | 270 - 500 MPa | Varies by base material grade |
| Yield Strength | 195 - 345 MPa | Minimum yield strength depending on grade |
| Elongation | ≥20% | Ductility in 50mm gauge length |
| Wire/Strip Thickness | 0.3 - 3.0 mm | Available thickness range for small coils |
| Coil Weight | 5 - 50 kg per coil | Small coil packaging for easy handling |
| Coil Inner Diameter | 200 - 400 mm | Standard inner diameter options |
| Surface Finish | Regular Spangle / Zero Spangle / Skin-Pass | Multiple surface treatment options |
| Application | Fencing, binding, handicrafts, construction, agriculture | Typical end-use industries |
| Certification | ISO 9001, SGS, EN 10204 3.1 | Quality certifications provided |
| Packaging | Shrink-wrapped, palletized, moisture-proof paper | Standard export packaging for small coils |
| MOQ | 2 tons | Minimum order quantity |
Acceptable Galvanized Coils — Minor Width Tolerance Issue Resolved
Ordered 4 tons of small coil galvanized steel, 0.5mm thickness, 50mm slit width, Z60 coating for light-gauge forming. Most of the material performed fine — coating weight and mechanical properties matched the MTC. However, slit width on roughly 15% of coils measured 51.8mm rather than the 50mm nominal, which caused minor jamming on our narrower forming guides. We raised this with the sales team and they responded within one business day, offering a credit on the affected coils and tighter tolerance confirmation for future orders. The resolution was handled professionally. Will trial another order with the updated tolerance agreement before committing to larger volumes.
Ordered 4 tons of small coil galvanized steel, 0.5mm thickness, 50mm slit width, Z60 coating for light-gauge forming. Most of the material performed fine — coating weight and mechanical properties matched the MTC. However, slit width on roughly 15% of coils measured 51.8mm rather than the 50mm nominal, which caused minor jamming on our narrower forming guides. We raised this with the sales team and they responded within one business day, offering a credit on the affected coils and tighter tolerance confirmation for future orders. The resolution was handled professionally. Will trial another order with the updated tolerance agreement before committing to larger volumes.
